Recent content by AAP

You have to open Davinci resolve or Final Cut first then import them into the media pool. Then you can draw them in a timeline and play. Am I missing something?

Hi. What do you mean they won’t play? Do you see an image? Have you tried VLC player? Is davinci not loading the clip?

Do you have the balance rings installed on the lens?

Have you opened disk utility to check and see if the card is mounting?

I was going to say vibration dampner board needs to be replaced but it’s odd it did not show up in x5s. However that could also be do to the contact between the damper and camera. Clean the contact and or change the board.

Have you uploaded you flight logs to Airdata yet? There is a lot of info you can find that may help you figure out the problem.

Have you checked your vibration dampner board? That seems to be the common point of contact. It’s a common repair that you can do yourself.

Hi there. We need some backup kits by next week. Can you do $1500? Ship to CA?

You. You meet to update your remote firmware and battery firmware to match the Inspire.

What were you using to maintain a straight path? Did you have your pilot feed with a hash in the center? What kind of condition were you flying in?

Follow the lens calibration procedures. Go to photo mode and pick the lowest aperture like 2.8. Then use auto focus to calibrate on something far off in the distance. Complete calibration. I use auto focus to get infinity then I swift back to manual. Without calibration the manual focus does...

Drones don’t fly perfectly straight without input. It most likely is a combination of environmental conditions like wind pushing you off course and your stick inputs.

Cmon Donny give him a break. You did however offer some very good troubleshooting tips.

Hi. I’m going to test with mine today. I’ll try to find a processing issue. What frame rates were you using? H264 or h265? I’ve always had a jitter with h265 and Omer computers. I’ll try to repeat and let you know.

Yes I own th x7 for some time. The only time I notice jag is in the live feed sometimes but not in the raw footage. Also, I barely see what you are talking about. Have you tried the cam in The air yet? Also your moving the gimbal pan very slowly. What are your gimbal settings? I ask because you...