Recent content by anv

Selling my modded inspire 1 for $1800 Canadian or best offer. Local preferred in Edmonton, AB. Also posted on kijiji Edmonton. Can ground ship for a fee. Comes with discrete battery mod (see my posts) and extended range controller mod. Also has two sets of Carbon fiber props, 2 TB47, cables...

You can do this but only the reverse. Note 5 with controller using Litchi and Ipad Air has magic leash for litchi app. No barometric tracking though. If you want that then you will need autopilot and ios only devices.

Like to buy both TB48 batteries. If still for sale. From Edmonton AB.

Looks like 5s2p with bms.

Pretty much dismantled the entire quad! Should have done a complete tear down for the fun of it :). Great guide.

Not certain there is any similar ones in the states. Just in europe and I don't know if LP is a knock off or the euro one is knock off but if you want cheap and use the existing prop threads then german made ones are the way to go. Search Inspire adapter zur montage and you will get a few links...

DJI Inspire 1 Adapter Plate for T- Motor CF Props Set (4pcs) Here is the image they have for those plates installed. It's image 7 and 8 on that listing...

The direct bolt on adapter replaces the t motor top plate for a 13mm one. You just verb the props. But since you want to use the top plate then should get the amazingthech one since you can swap it. And yes, the 39 dollar ones are complete with 2 cw and 2 ccw adapters. Just need the props and...

Also the AmazingTech adapter 2 pairs is complete set for 39 usd no worries if you go that route just long ship time in my case. It holds up pretty well just spin on then hand tighten a little (doesn't budge if spun on tight). Be sure to use a little loctite on the screws when mounting the plate...

There exists such an adapter for just bolt on and verb the t motor props for a 13mm slot. Google dji t motor adapter. EBay same search will also give you the item you desire.

14"

Authentic T-motor CF props best way to go else get a knock off brand at a fraction of the cost and get them balanced and if you are lifting anything other than an x3 get 14". 1448 is common size and pitch angle from what I've read.

Just tested out the AmazingTech props, I did not do a hub balance, 3 of 4 were out of hub balance. These props are shorter than the standard dji ones and aren't as stable hovering especially if you have add ons. I suggest shelling out for real T-motor props and buy just the adapters for them.

Exactly just like that. HINT: I tucked a few strands of wiring tightly through the little opening between the bend of the tab and the board and added solder through it for a more secure fit. I use stranded 12awg but NOT rc noodle 12awg. Too many strands on those to solder properly in a small...

I finally got mine after 40 days. If you are thinking of buying one, I suggest a quicker shipping method. Also the packaging it was in is terrible, a thin bubble wrap envelope that was torn and Canada Post wrapped it all in a sealed appology bag when they found it torn in that condition... Have...