Recent content by Canuck32

Boca bearings 5x11x5 ceramic, 2 per motor Here a post from TheEditor I copied for info on the replacement ↑ It is a very easy fix if you have changed out brushless motor bearings before. If you haven't then it is still fairly 'easy' but you just need to be methodical and careful. Basically...

Hard for people to know the rules that are in use when TC can't even use the same rules across the different regions. Look at the differences between the PNR region (which I think is being fairly proactive and fair to us operators), which we are both in vs Quebec or Ontario mishmash.

Another way I have used in past was if I was taking pics and need to mark one for later, I'd take a quick (2-3sec) video after it, as a marker, or vice versa for video markers take a pic between for separators. Then later go through files and pull as required.

No airspeed has the wind included in the speed, but there isn't a airspeed measurement done on the inspire

Almost impossible to say due to wind effects. Head wind will require more tilt vs calm wind to get the same ground speed. Tailwind would be less tilt than calm or headwind. Then throw in quartering winds. Would be better to set an angle and fly craft at speed required to maintain your desired...

Update as of June 10 This notification is being sent to all current and past Prairie and Northern Region Special Flight Operations Certificate Holders (UAV). Please be advised that the current Forest Fire Airspace Restriction for Fort McMurray and Area is still in effect and is expected to...

If you ever go on pootube and look at the aviation channels like VAS aviation that plays the inflight comms you'll notice most of them on there are happening around New York with planes coming in to JFK. Buffoons seem to be everywhere.

There.is a chance if you are wanting to try there is possibly a way to unbrick the batteries. I'm not sure how successful it may be for you or if you are wanting to try it but here's the info for you to decide. How to revive a bricked DJI battery (NEW)

Have you calibrated your RC sticks? Probably they're a bit off and sending a turn signal to the craft

Sorry didn't notice the litchi part. Not sure if still applicable to them but that is the go app default setting and I'm not sure if litchi is allowed to override that feature in their sdk

Under low battery warning if you don't cancel the warning when it hits that point it goes into RTH mode. Also a red x comes up that you need to press and acknolodge that you want to cancel for it to exit out of.

Possibly I2 release soon??

Actually I do have 14x4.8 t motor CF props on my inspire and have been using CF props for years on my other RC equip. And though you think they don't actually CF is possible to get hairline cracks and delaminations that can grow into catastrophic failures quite quickly. I still prefer the CF...

Don't kid yourself, carbon props can suffer the same catastrophic failures. Inspect each for possible failures. The main advantage in CF props is their stiffer and don't flex as much as the plastic props.

RC doesn't need update, just the inspire needs update to get FW. never hurts though to check other batts in case they are on old FW.