Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by chris digata

  1. C

    Z3 breakup issues

    Well if this is the camera to be used on the new inspire 2 then they have real problems.. if the new camera every gets back to me and still has probs i will be asking for refund and looking for an x3 as not interested in zoom what so ever
  2. C

    Z3 breakup issues

    I got my Z3 to use on the inspire pro to lighten the load in cold weather and fun flying.. when it arrived back in september and set it up, i had a 4 second lag on the app with the video feed. Contacting dji they said it will be the go app and new version will be updated soon.. it never happened...
  3. C

    Crashed, not sure why..

    If you was not runing with set way points or a mission then why was you using Litchi, they state that if anything happens that is not normal to cancel the apps functions but the go app would have been fine for what you were doing. Having said that you had time to take control but was the remote...
  4. C

    Ouch. Inspire to the face.

    She was very lucky indeed and never even got a cut.
  5. C

    New X3 camera on inspire 1 pro

    yes spot on.. its like the phantom 3 pro and advance. the only difference in the firmware is the camera.. both firmwares contain the same data for the craft and batteries ect, the only difference is the camera. so make sure you do all main updates to the craft with the pro firmware with the x5...
  6. C

    New X3 camera on inspire 1 pro

    to answer the Both fw installed, they are the same fw, only the camera part is different and that is stored in the camera board and not in the inspire craft
  7. C

    New X3 camera on inspire 1 pro

    no the firmware is not the same, inspire 1 fw is for the x3 inspire pro fw is for the x5. but where you are getting confused is this: The inspire airframe (craft) is the same firmware in both the inspire 1 fw and the inspire pro fw, the only difference within the .bin file is the camera fw. eg...
  8. C

    WARNING Inspire near crash error close to NFZ

    Seems they are playing for time.. but I dont agree with these enforced NFZ`s , they should be just warnings where the craft just hovers until you click and agree to proceed. Any geo fencing is going to cause more safety problems and if App based if an idoit wants to fly over the football he will...
  9. C

    Inspire 1 Pro Complete In-Flight Failure - BATTERY OVERHEAT

    We can all be judge n jury and we can all see he was taking risks.. but would also like more info from the OP to see if their is a problem. it would be good to know the batt temp at the point of warning and power fail , was he flying in the red? he must have been getting some pre sense of heavy...
  10. C

    Inspire Pro Battery data/ cell info - confirm?

    Dont mean this the wrong way but I can suck eggs and been flying since 2012, one battery is only 15 charges. all calibrated and maintained.. im going to do more tests with the standard x5 lens today to see if it is weight and might be where i store the craft because I warmed one battery to 20c...
  11. C

    Inspire Pro Battery data/ cell info - confirm?

    This has been going on since winter, I put it down to the cold.. but can someone with a pro and x5 please confirm if yours is the same or do I have a problem. Eg. flying the inspire pro, battery temp 37c voltage 76% and anything but a hover puts all cells into the yellow bars on the app once...
  12. C

    New X3 camera on inspire 1 pro

    the firmware is the same but each file contains different camera/gimbal data so you must used the correct firmware for the camera and gimbal that is on the inspire at the time of update. The app can get confused so needs reboot but the camera is updated from the sd card in the craft
  13. C

    New X3 camera on inspire 1 pro

    no as the inspire pro is an inspire 1 version 2 anyway, but just make sure the correct camera is upgraded when on, eg x3 furmware to x3 camera
  14. C

    New X3 camera on inspire 1 pro

    yes the inspire 1 x3 will work on osmo and on the inspire pro
  15. C

    Battery Not Fully Charging

    I knw this is an old thread.. but noticed that when an cell gets charged over 4.30 the protection kicks in.. was this battery charged with the dji charger or other? and did dji say anymore on this..