Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by Christian Wiggers

  1. Christian Wiggers

    XT & Inspire 1 RAW question

    The XT will work on the Inspire 1 (X3,X5 ore X5R) but the XT2 will only work with Matrice 200 serie and Matrice 600
  2. Christian Wiggers

    X7 - What lens do you use most?

    I got the X7 and the set of 4 lenses recently (you get nearly one for free when you buy them as a set), and have up to then used X5s with pretty much all the lenses you kan get (7,5, 12, 15, 17, 25, 45 and 14-42 zoom) and I must say the X7 and the different lenses is a pleasure to work with. The...
  3. Christian Wiggers

    FLIR/Thermal on I2?

    Here are a few reasons why I stick to DJI solution. - With 1100 gram it is a pretty heavy payload for the I2 - It will lift it, but the flight time will be reduced considerably. - As I understand it, it will be a two man setup, ore at least you have to set the tablet for controlling the flir...
  4. Christian Wiggers

    Anyone tried these folding props?

    You don't know what your are talking about !!! All multicopters with folding props have this vibration when the props start spinning. This vibration is caused by you by hand not er able to fold the props 100% in balance. But as soon as the props spinning the centrifugal force will Straighten out...
  5. Christian Wiggers

    FLIR/Thermal on I2?

    1:18 they show the new adapter.
  6. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    I am not going to fly a RED under my matrice 600. I bought it becaurse of the Redundency with in Denmark give you possibility to leagely fly over people. Second reason is it will be used were i need the extra fly time, ore a more stabil platform in windy condition. But is the the Freefly ALTA...
  7. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    The most importen but also the most difficult is to understand ones need in the future. But i do think it will be possible to mount a camera rig on top on the matrice 600. As I understand it the Ronin MX is suppose work upside down, and with at top mount plate what will then prevent that you...
  8. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    What is the definition of "a game changer" ? To compare with a bunch of Inspire 5XR makes no sense. You don't get the fly time, you don't get the redundancy, you don't get the lifting power to lift bigger cameras. Can you ? How much pay load can you get off the ground with 15 min of flight...
  9. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    Well what has been "proved many times" is with the Inspire platform that has been around for 18 month. Nobody has that experience with the Matrice 600, and for most cases it will not be as big a problem with battery that does not work, when you have tripple redundancy. I agree the Alta 6 og 8...
  10. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    I totally disagree. M600 is a much bigger platform, with all new A3 system and the possibilities for expanding it. I do agree that the batteries can be a pain, but you also get some benefits. You get triple redundancy, and you can travel with plains if you use TB47S. You also has the advantage...
  11. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    I think DJI may have measured with the Ronin MX with camera, and if so you will get more wind resistance. But with X3, X5 ore X5R it is a much more stabel platform to fly that a phantom or Inspire. It is a bit of a pain with many batteries. I have a smartpower charger and it is very good. I use...
  12. Christian Wiggers

    Matrice 600 vs Inspire 1 Pro/Raw Industrial Use

    I don´t know the size off the contract is, but I will definitely go with the Matrice 600 for that kind of jobs. I have (two) Phantom 4, Inspire pro and Matrice 600, and even though it says other wise in the manuel the matrice 600 is by far the most wind resistance og the 3 craft. 2 days ago i...
  13. Christian Wiggers

    How Large of a Photo can I print using Raw Setting with the X5?

    I have had the same thoughts, about a big panorama photo. We have a photo print company that can print up to 120"x 40". (300 x 100 cm) http://www.pixum.co.uk/poster-canvas#anchorPriceList I know that a single photo from X5 will not be good enough. So I was thinking of take multiple pictures...
  14. Christian Wiggers

    Known fatal drone/SUAS accident ?

    Were I live (Denmark) we have lots activities which can bring danger to other people. Every year lots of people get hurts with fireworks, either because the self do stupid things or other nearby do stupid things. Another place where we often see eye injury is when young boys plays with...
  15. Christian Wiggers

    Known fatal drone/SUAS accident ?

    I do think rules and legislation is a good thing by they should be reasonable in relation to the risk. I can see you are from UK. In 2013 there was 381 drowning and other water related deaths in the UK Source - Would it not then make sense to prohibit all swimming in the UK ? Do you have rules...