Recent content by daveness

I also am having the tilted gamble problem, and I never did before. I’m thinking DJI has bugs every time they release software and this is the newest one. I do need to update software so I’ll see if this problem goes away. The picture I lost were important. Probably lost $2k in revenue.

@DaBone I'm having the same problem, did you find a solution or reason? I shot in two locations today. None of the pics from the first location are on memory card.

@AcesAreWld I could see charging that fast at 24V input, I'm surprised you can with 12V input. I wonder what is different, perhaps wire size as you indicated. But those DC to DC step up converters have a 20amp input fuse. Hmmn. I'm using 10awg from battery to modules and that is where it was...

@seahawk92 I turned the current limit down to 5 Amps today on both channels and it worked well. Didn't blow fuses. It took 30% batteries (two at once) roughly 40-50 minutes to fully charge and shut off their charging so that isn't anything to brag about but it is quite a bit faster than using...

@seahawk92 @AcesAreWld @Dobmatt here is what I've found. @seahawk92 To get the batteries to receive voltage using this connector Buy Inspire 2 Remote Controller Charging Cable I found there is one pin on the connector that must be removed. I believe it is grounded and that the battery won't...

@ACDS thanks for that.

Part 107 Certified

I know it's been a while since this was discussed, but I'm wondering if anyone has come up with a good solution. I'll be flying in Iceland soon and was thinking of using a case with one of those iron filing ski hand warmer behind the ipad.

@seahawk92 , Hmmn, well maybe I'm in for a surprise. Either way, I'll let you know how it turns out.

@seahawk92 I'm following what others like @AcesAreWld did. I'm modifying this cable Buy Inspire 2 Remote Controller Charging Cable to use the connector that attaches to the battery and wiring that up to the output of my DC to DC converter. I first wired one DC to DC converter to the charging...

I've been following this thread, and every other thread on mobile charging of Inspire 2 batteries. I'm fine with only charging one pair at a time. I have three pairs so that gives me over an hour of flight time before I am out of batteries. I'm building a supply that runs off the car battery...