Recent content by Dxtrty

i allways take the SD's out to read, Every start up invokes wear on the 210/gimbals. especially the heavy Z30 Be very carefull when leaving on the cam's during transport, the dampers will get worn out fast. Through the CSky is a hassle.

Treat them well and be strict on yourself (pic) and everything will be fine , also the %

Complying to the rules and having waivers is a start but doesn't add a lot to real 'in/above the field' safety. I hope you work with a crew of 3 or 4 people; pilot-cam man- 1or 2 spotters. I would like to have a parachute/motor kill system on my uav for this kind of job.is suppose it's a quiet...

i still have a V1.08 and V1.09 version , Euro seasoned... can't upload them here

Height indicated in the app is not precise due to barometric measuring which results in up to 10% error at low altitude (25-45m) when flying in gusty wind. i use a Airobot system on my M 210 to measure H. with laser, as my client requests cm precision ( in reality it's dec. precision) So i can...

the ExT is when u use an AV signal (analog =not hdmi) ei. a fpv cam

Kudo's , hefty flying/cam work , as slalom waterski is too .

Toppie! intens fly&cam work! some were real close, yihaa!

Molto bene ! Nice to see it from that angle and in that season. I've driven it a few times on the edge off being closed due to snow; on our way to a powderchase!

Toppie! nice rythm cut.

Interesting thread, but all quiet theoretical engineer assumptions... WIth some craftmanship and hands-on material experience this is a good solution. Though you should also solve the vibration issue itself. Some tips: Drill from the inside if possible and pre-drill with a 1mm. and support to...

Why not reset the homepoint to your Tx, once your airborn ?

Yes, had issues after upgrade .100 to.300 'sensor error' downgrade was no solution send in AC and Cam it's repaired under warranty , should be getting it back this week

things are different up there, you took a nadir shot with the gimbal at 0˚

toppie! love the flakes at what height approx?