Recent content by Farnk666

OK, time to try again with small words and pictures. Here we have an M600 Pro with an XTr attached. IMG_20180607_122450 by Farnk666 posted Jun 7, 2018 at 12:38 PM Now lets measure the foot rail separation distance with standard length legs IMG_20180607_122519 by Farnk666 posted Jun 7, 2018 at...

Yes more money, but the 9hz version is just too limiting. 30hz is the way to go, radiometric also.

Used it once - went back to DJI GO. Only tried it as originally I couldn't get Isotherms to work on DJI GO. They worked in XT Pro however. Funnily enough the very next time I tried Isotherms in DJI GO it worked and has worked properly ever since.

Not at all - if the angle of the legs remains fixed (as it will in this case) and you shorten the legs, the feet will come closer together, reducing the footprint and resulting stability on the ground. Your example 'B' assumes that the angle of the legs changes somehow. I don't believe that is...

Was more referring to the effect that shortening the leg tubes will bring the "feet" (Horizontal tubes that meet the ground) closer to the AC's midpoint and each other. This will reduce the overall 'on ground' footprint and reduce stability. Engineering 101.

Yep - the GO app logs flight time and there is a Maintenance due message that pops up when the flight time limit is reached. It's a matter of just tapping OK on the popup. Don't have the bird in front of me right now, otherwise would send you a screencap.

If you shorten the legs you will make the problem worse, not reduce it. The issue here is that the AC has a tall COG and large mass yet a relatively small contact footprint in comparison. If you shorten the legs, the footprint gets even smaller and the AC will be less steady on its feet. The...

If you like the XT2, you'll love this... https://www.aerialtronics.com/en/products/pensar#application

From DJI's perspective the Inspire 1 is 'end-of-life'. (i.e. no further development) 'Obsolete' would be the term to use come the day that parts, accessories or consumables are no longer made available by the manufacturer. As to when DJI makes that call, no idea but I doubt that they would...

Certainly don't bet the farm on there ever being a mounting / adapter solution for the X5s/X4s to run on the M600/M100 or Inspire 1 airframes. It just will not happen. Similarly, don't expect to see X3/X5/XT/XTR on the Inspire 2. Dji has forked the platform and the Inspire 1 is end-of life.

What, just like every other product they've released over the past 2-3 years? LoL!

Many thanks - about to purchase and the dealer couldn't tell me if they would fit.

Yes manual selection of channels and you're golden.

Portable Anemometer for me - very happy!

Everyone with a 2nd RC has this issue - slave video feed is broken following the app/fw update that reduced channels to 8 from 32. DJI will not comment publicly, but refer users to the "32 Channel hack" - google this for a workaround, but be aware that it restores frequencies and output that...