Recent content by jamiebm

You can download FLIR tools free for 30 days from flir’s website.. https://www.flir.com/products/flir-tools/

The jpeg and tiff files on the card are only viewable if you install FLIR Tools or FLIR Tools +. The jpeg on there are actually rjpeg which are radiometric with data and not normal plain jpeg. The tiff are pure radiometric and either FLIR Tools or FLIR Research IR are needed. i recommend...

Have used on both without issue but have tried every possible scenario.... mostly we use XT2/X4 cameras for automated mapping and some stick flying.

If it’s V2 or upgraded to V2 , yes it will work. Most XT’s bought in 2018 or later are V2 but you can inquire with DJI with SN# to ask. If it’s a V1 you have to send into DJI for upgrade or won’t work on M200’s.

You can use iPad and Ground Station Pro for M200. Can also use DGI GO

If you are doing inspection and mapping for utility/ power and PV, for proper resolution/height is 13mm.

Yes, all the cameras can connect to the DJI 200 series. I have a M210 and it comes with proper adapters. M200 is the same as 210 but only single gimbal. M200 is an amazing aircraft .

Yes, It is possible. We fly many Solar facilities and create full resolution Ortho’s from the photos. It’s required a minimum of 70% side overlap and 60% front overlap. There is no commercial software that can do it but there are a very few companies that can accomplish the task. We use...

Pilot