MME is a very good for mapping and also 3D models, I had loads of problems at the start it was my configurations not the software. The support is almost instant, I had that problem with camera hitting the deck, tried to purchase x4s nobody seem to have one for sell as they stopped making them...
Hi,
I have my M100 sitting right next to me luckly enough, for a start which system are you using mac or Windows ?there is two versions of Assistant 2 for Matrice 2.0.8, if you using mac your wasting your time on v2.0.8 it will recognise the M100 but will not update firmware, only on M200 M210...
By the time you reached the top of the tower it would be time to come down again, you would use up alot of power getting there, and when you do, you would have no time for video if your going to descend safely. Also keep well away as the top will be slightly swaying in the wind. I'm completely...
Nice work, and informative video, i've been using Map pilot and Metashape for processing , I only used the crosshatch now i'll do three orbits at different levels as you did and hope to get the same results, Thanks for sharing
Hi, I use the Goapp and Map Pilot all the time and fly out a large area with a M100 and always with a near 100% connection, I think your right in saying it could be your controller or it could be on the other end to. A couple of years ago I built a s900 with a e1200 upgrade and A3pro, and...
15ºc and above 20ºc is optimal temperature for a battery, Insulate them or there are a few battery heaters out there because some batteries are more exposed to the open air than others.