Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by Marketal

  1. Marketal

    No Image Transmission Signal - Gimbal OK

    Final word on the matter. I have the Inspire 1 Pro up and running again with an X5 camera. It's on the 1.11.05 firmware, and has a GL658C Remote Control and the Aircraft is a model T600. I took it for a long flight over farmland t'other day and it flew to 750m, with no image transmission...
  2. Marketal

    Intermittent Z3 "No Image Transmission Signal"

    I completely concur with Brian. I bricked my X5. See my post 'No image Transmission signal gimbal OK' Brian and Donnie Frank were completely correct. I'd like to borrow a X3 camera to try the downgrade, but can't find one in the Scottish Borders.
  3. Marketal

    Gimbal Gyroscope Error

    Thanks, Brian. I've read your posts before, but some of them went over my head... I'm a simple chap. I'll reread them. Thanks for the reassurance with the Mavic 2 Pro!
  4. Marketal

    Gimbal Gyroscope Error

    Thanks(!). No, really! It's all frustrating. I'm likely to head to Heliguy (DJI) tomorrow. I can't be without a drone, so I'm thinking of the Mavic 2 Pro. If the Inspire gets fixed I'll likely put it up for sale to offset the cost of the Mavic. If Ford, Toyota, Whirlpool, etc treated their...
  5. Marketal

    Gimbal Gyroscope Error

    The camera now doesn't connect to the drone, so there's something stopping it. I've tried the drone-hacks app, but the Inspire 1 isn't yet supported by it. I hope it is soon.
  6. Marketal

    Gimbal Gyroscope Error

    I'd come to the same conclusion as you (use the forced update method to get it back to 1.11.50) and I've tried to "Force update" it to 1.11.50 and succeeded. Gimbal unresponsive, and "No image transmission" now. The reason I wanted to downgrade it was the image transmission was poor, screen...
  7. Marketal

    No Image Transmission Signal - Gimbal OK

    I did try fiddling with the gimbal mount wires, there was no issues with it. Thanks for your feedback though.
  8. Marketal

    Gimbal Gyroscope Error

    Hi, Further to my earlier post on "No Image Transmission Signal - Gimbal OK" I received the camera back from DJI. Now on FW 1.11.01.50. I followed Donnie Franks magic Key and it's now saying it is on FW 1.08.01.00. All well and good, see photo... However, the Gimbal is Limp, The drone fires...
  9. Marketal

    No Image Transmission Signal - Gimbal OK

    Hi, I sent my Drone to Heliguy in Newcastle upon Tyne 7th January. I received the drone itself back at the end of January as only the camera was at fault. Today I got back a different camera that is working. Irritatingly my camera spent several weeks with the carriers enroute to the...
  10. Marketal

    upgrade on Inspire 1 Pro X5 camera no longer works

    No, It's usually me! Sympathies anyway.
  11. Marketal

    upgrade on Inspire 1 Pro X5 camera no longer works

    Sorry, I'm out of my depth now. I'd suggest you keep trying to update a few more times and then if the issue persists I think you'll need to investigate it further. Cheers Mark
  12. Marketal

    upgrade on Inspire 1 Pro X5 camera no longer works

    Check the txt file that is created on the SD card after the update. It will say failure or success. I think the DJI instructions are that you try and try until you get success. There is another file worth looking at that is created on the SD card. It's path is SDcard then misc/log/then the...
  13. Marketal

    No Image Transmission Signal - Gimbal OK

    Hi Folks, I sent this to Heliguy in Newcastle who have checked it out. It appears the Drone is good - the fault lies with camera/gimbal as it works with other gimbals X3, X5 and X5R and there is live video feed. They are sending me the Drone and camera back and sending the gimbal/camera to DJI...
  14. Marketal

    No Image Transmission Signal - Gimbal OK

    Just an update... After a long chat with a guy who repairs these things I decided on his recommendation (sorry Donnie) to update the firmware (he was convinced it's a firmware issue) but only after I had subscribed to digdat0 on YouTube and decided that I could remove some of the restrictions...
  15. Marketal

    No Image Transmission Signal - Gimbal OK

    I've attached three JPG's of the contacts, including the contacts on the camera lens bayonet. They all look OK to me but perhaps to your skilled eye you'll see something I've overlooked. Incidentally I've cleaned the electrical contacts with a rubber (I think in the US they call them erasers for...