Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by MedicFL1

  1. MedicFL1

    Please explain EI mode and how I should use it

    EI mode A/K/A Exposure index , DJI does not recommend going over 1600. In addition if your using Davinci Resolve and go from Linear to D-Log LUT you will also need to add a transform to whatever Color Space your looking to work or deliver in. Meaning Rec.709 Vs. Rec.2020 and delivering in P3...
  2. MedicFL1

    Please explain EI mode and how I should use it

    DJI WHITE PAPER Here is DJI's White Paper Explaining exactly what the EI, D-Log, D-Gamut is and how it works. Hope this helps someone. Web page; https://dl.djicdn.com/downloads/zenmuse+x7/20171010/D-Log_D-Gamut_Whitepaper.pdf
  3. MedicFL1

    Matrice 200 V2 and Matrice 210 RTK Issues

    Would love to know if you got this repaired and if it was the "main controller board" a/k/a flight controller board inside the aircraft.
  4. MedicFL1

    Please explain EI mode and how I should use it

    It is DJI "Sensitivity Gamma / Gamut" setting
  5. MedicFL1

    Dead inspire 1 remotes.

    I have 4 remotes and they are working fine, as Donnie's are. Is your firmware matching your A/C firmware or so far out from each other they don't work? I'm guessing that you've already tried re-linking them. If you need one let me know.
  6. MedicFL1

    D.R.E.N. Robotics

    Flir Vue Pro R 640x512 13mm 30Hz is $4,850.00 Dren EYE Gimbal was reported to be $1,899.00 or $6,749 ... The XT -R is overpriced by far.
  7. MedicFL1

    D.R.E.N. Robotics

    That's a shame as it looked like a good mount for the Flir Vue Pro R. Their Website is now Down. Hope they come up with a working system as competition is sorely needed in this area.
  8. MedicFL1

    How to trigger drop mechanism

    Any servo can be connected and controlled via the I/O controls on the M210/M210RTK models. See the YT video showing the mammoth drop system or the other companies $499 light system where they control it via the app and show you the screen.
  9. MedicFL1

    Disassemble /Repair Manual

    I have seen one gentlemen in the DJI Forum fix, remove and replace a burned out motor and ESC. They, the motors, have actual plug in connections of red, white & yellow. While he did the repair himself, he said a friend had a service manual he could not share. When DJI was asked there for the...
  10. MedicFL1

    210 RTK - DataLink Pro 900 antenna wiring on controller

    Where are your small Black ones? These spares were for the Air units on the Matrice 600 Pro as stated in that tiny manual. You can see where they attach to the clip on that aircraft.
  11. MedicFL1

    210 RTK - DataLink Pro 900 antenna wiring on controller

    Actually a very good idea... and why didn't i think of that? For some reason the manual even states to keep them aligned (as far as height). Mine stay in place using the little black square on them but from time to time, when i change the position of the crystalsky, the movement knocks them loose.
  12. MedicFL1

    Live Streaming w/ Crystalsky

    It appears that Live Streaming with DJI's version of Android is off limits with the Crystalsky. I use RTMP to Live Stream without a problem on iOS devices like the iPAD mini 4 via the mavic 2 Pro and the Matrice 210 RTK but cannot get past the "connecting" alert (top left of screen) using...
  13. MedicFL1

    Airline travel with TB55 batteries

    What did you wind up with as your decision. The M210RTK V1 allows for both batteries and more application usage than the v2. The ground station parameters can also be offset in DJI Assistant when necessary.
  14. MedicFL1

    M210RTK Ghost - Really Need Some Help

    Did you get any answer from the DJI Forum on this? I suspect not as they are supposed to be on the Z30 sd card. Did you try switching out the SD card with another one and see if the same problem exists? I've not hear of this happening but i sure as heck don't want to see it on mine in the...
  15. MedicFL1

    Central Florida, east coast

    Still Looking to Create an area group for multirotors. There are existing RC wing flyers in the area but we need a solid group to instil knowledge, sevelop skills and thereby increase abilities. Anyone?