Recent content by mrinflatable

reliability was the main reason i brought it too. the whips are slightly better than the stock. May be due to the fact the titan antenna cables that replace the stock ones are a lot better quality too. Running the whips is not amped/boosted though.

The range on the stock controller is good enough. Unless you're flying in a highly populated area or going for a record distance then i dont think it is necessary Although, I have definitly noticed a clearer image feed, less cut outs (black and green screens), increased range but haven't...

I have the atlas on my inspire 1 controller. very heavy. good thing about it compared to the cyclone is that the whip antennas are removable so you can just fly them with just the whip antennas and not use the boosted panel.

also, if you are flying in a highly populated area you may be getting alot of interference. doing the 32 channel hack may help.

the only way to downgrade from 1.11 is to create a WM610_FW_DEBUG file.

when i tried to fly it out, the aircraft would cut out after 100-150m, but once i rotated the aircraft to fly it back to me the full reception would come back. so i tried flying it backwards and i had perfect signal for as far as i could see.. rotated the aircraft facing forward and bang.. no...

all good. i fixed it. one of the antennas was shorting.

Does anyone know where i can find v1.10 and 1.09 firmware? Can only find v.1.08 online

Hi, I have a inspire 1 v1 with x3 that im starting to give up on. When i first start up the aircraft the RC and HD signal bars are all full/strong. However, when flying out 100m+ or so, i start experiencing weak image transmission warnings, video is greening/blacking out, aircraft...