Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by Rickesco

  1. Rickesco

    Main board failure

    No.. I had already upgraded the FW to the latest to current one a few weeks ago.. My bad!!!
  2. Rickesco

    Main board failure

    Thanks, Yeah I checked and all the connectors are in place...
  3. Rickesco

    Main board failure

    Guys, This morning Im ready to go flying and when I turned it on the Inspire is just beeping and I get these errors on the scree 1- Main controller connection to center board failed 2-Gimbal cannot receive main controller date then it also says: Check the 8 pin plug that connects the damping...
  4. Rickesco

    Loosing Video transmission

    Hey Guys, This is something that just started a few weeks ago, In the middle of my flight I loose my video transmission and when it comes back it's pretty choppy. Any idea what could be causing this. I've taken the camera off and cleaned the connectors and no results. I appreciate your...
  5. Rickesco

    Losing signal

    Very easy, Just take great care with the ribbons.
  6. Rickesco

    Losing signal

    I had the same issue. My I1 has been flying great with no issues, then one day it started to loose the signal. I tried everything possible. It all went away when I replaced the USB module. yeah it was 99 bucks but I didn't know what else and I did not want it in to DJI. I ordered it, replaced it...
  7. Rickesco

    Inspire 1 Radio wont connect to DJI GO app, Help please!

    Hey guys, I replaced the USB module and it works perfect. No more drop offs. Fairly easy to replace, just had to be cautious with the three ribbons. Thanks..
  8. Rickesco

    won't start

    Editor, Thanks for some reason I had to cal it a few times until it finally took. It's all good again-Thank you for your help Rick
  9. Rickesco

    won't start

    No, but that sounds like a good idea. thanks!!!
  10. Rickesco

    won't start

    Thanks Steve.. I'll try it..
  11. Rickesco

    won't start

    Version 1.5.70 Yeah. tried that also...nothing
  12. Rickesco

    won't start

    Just tried and still the same...
  13. Rickesco

    won't start

    Hey guys, Ok after having a lot of issues with the last firmware, now the Inspire won't start using the joysticks. The only way to start it is to used the auto takeoff from the APP. The Inspire flys well- no issues there. Any idea why this is happening ?? I Appreciate your comments.. Rick
  14. Rickesco

    FW Failure

    Well I solved the problem. Here is what I did. I formatted the SD card and placed a fresh copy of the BIN file. I placed it in the camera and with the radio off I started it up. It was still doing the same thing (Beeping and yellow light flashing) I let it sit there and after approx 40 minutes...
  15. Rickesco

    FW Failure

    Yep... Before I realized it was on, it had already started the upgrade.