Recent content by ROKImaging

Well I have solved the problem... I put the z3 back on the osmo and went into the settings on there. Within the gimbal settings there is a section for pan and pitch for the joystick. The pan speed was set to 0, so on increasing it to 10 and putting the z3 back on the Inspire it all seems to...

I don't suppose anyone would have any thoughts on this? I have bought a z3 to run on the Inspire 1 and I'm struggling to get the camera to yaw using the sticks. You can control the Pitch and Roll, but the yaw has no affect. Likewise if I change the pitch/yaw on C2 the roller will change the...

Hi Slightly new to the Inspire world. I bought an Inspire Raw second hand, and whilst going through checks the slave controller is just intermittently flashing between pinky/purple and blue. It appears to be disconnecting from the Inspire and reconnecting. I have checked the firmware on the...