I always check that the exposure is no longer than 1/6s (if I use a 45mm lense on the X5S). When I shoot with a wider lense, I can try an exposure up to 1/2s; however I will then have to pick out the sharp images during development.
Some examples attached.
That's rather strange. I've never seen any frame in my images.
Anyways, this only proves that Olympus lenses vary considerably in quality and you gotta check them carefully before you buy one.
It's a known problem. I tried several lenses, and ended up with just one I liked most. However, I still have to close the aperture up to 6.3 to make the left corner blur go away.
By the way, the Olympus 45mm blurs in the right corner :)
The Inspire 2 is one of the least stable drones I ever flew. However, I'm not either experiencing connection problems or having the camera settings reset anymore.
I had the same issue.
https://inspirepilots.com/threads/weak-image-transmission-signal-until-the-drone-warms-up.22817/
I tried another remote controller, new updates and so on.
Ended up replacing the main controller. Now everything's fine.
My drone always had weak connection error on every startup. Also, camera settings reset to default every other time. Ended up replacing the main controller, and the problem's gone.
The GPS module has nothing to do either with connectivity strength, or camera glitches (which I always had on restart). Replacing the faulty controller solved most of the problems.