ALL SOLD - Selling Inspire 1 equipment - X3, Z3, X5, other accessories (Updated Nov 21)

[CoreySnipes]

UPDATED November 21 - EVERYTHING IS SOLD
I appreciate the advice and support I've gotten from everyone here over the years. I'll leave the price list here for the historians.

• TB47/48 batteries - US$ 75/85 ea
• Z3 cameras (1) - US$ 169/ea
• X3 cameras (1) - US$ 129/ea
• X5 vibration absorption gimbal boards (1) - US$ 99
• X5 camera with Olympus 14-42 M.Zukio zoom (1) - US$ 499
• Multiple sets of spare propellers, every style including both quick release models and screw-on - FREE + shipping
• X5 camera with stock DJI lens (1) - US$ 399/ea
• GPC and similar hard cases (4) - US$ 49/ea + shipping
• Stock case (1) - FREE + shipping
• Working controllers GL658B (2) - US$ 99/ea + shipping
• ND filters for X3 and X5 US$ 20/ea + shipping
• Battery warmers (2) - US$ 10/ea + shipping
• Battery chargers, single (4) - US$ 10 + shipping,
• DJI 4-way charging block - US$ 30/ea + shipping
• Inspire aircraft stuck between travel and flight mode (motor makes noise but will not stop trying to raise or lower landing gear). Low flight hours, good condition, flew great until the travel mode problem. US$ 50 + shipping
• Inspire aircraft stuck in travel mode (has crash repairs including repaired arm, center screw seems bent, was purchased for parts) - FREE + shipping

 

[Sky_Hawk]

Hi Corey, I bought the TB48s and a Z3 from you. Are the X5 vibration boards you have complete with the mounts and gimbal board (with cables)? If so, I most certainly can use one with the Z3, as my I1 is an original (non-Pro, non-V2), and has the simple front-mounted gimbal mount.
THANKS!

 

[CoreySnipes]

Hi Corey, I bought the TB48s and a Z3 from you. Are the X5 vibration boards you have complete with the mounts and gimbal board (with cables)? If so, I most certainly can use one with the Z3, as my I1 is an original (non-Pro, non-V2), and has the simple front-mounted gimbal mount.
THANKS!

Hey, yes I believe both are complete with all cables. Let me get a couple of photos when I'm back down in the office this week and I will send over the details of what I have.

 

[Sky_Hawk]

OK. Perhaps we can work a deal on the X5 with the Olympus lens and one of the vibration plates. I really don't need to keep pumping money into an I1, but...if the price is right, LOL!
THANKS!

 

[CoreySnipes]

OK. Perhaps we can work a deal on the X5 with the Olympus lens and one of the vibration plates. I really don't need to keep pumping money into an I1, but...if the price is right, LOL!
THANKS!

I listed both vibration plates on eBay today. They come with hardware and screws, but no cables. Your existing cables from the X3 gimbal plug directly in to these.

Listings: DJI Inspire 1 Zenmuse X3/X5 Gimbal Camera Vibration Absorbing Board (#2) | eBay and DJI Inspire 1 Zenmuse X3/X5 Gimbal Camera Vibration Absorbing Board (#1) | eBay

 

[OnyerEdson]

Hello, I hope my enquiry finds you in good health and comfortable.
I'm a retired U.K. ex pat living as economicaly as I can in Bulgaria. I took interest in drones just before major hip surgery 2023 with a second hand Mavic pro. This spiked me to purchase vie eBay a complete set up of Inspire goodies, however on arrival from UK the seller negated to tell me the gimbal had suffered irrepairable damage. After lengthy mails to him and eBay I received a £100 refund which was put toward an Osmo. My thinking was to use the camera Zemuse on my Inspire. It has been a slow recovery from my operation and my hobbies all shelved until recently. The kit from UK includes 5 batteries loads of accessories of which no use unless I can complete the set up with fully functional Gimbal etc., Today after research took a blow to find the Osmo incompatible. Looking on this site I see you are/were in posession of cameras and I respect a while back. Do you still have items for sale? If so would it be possible to ship to Bulgaria? I'll meet shipping for sure. Worth a try..
Have a Wonderful day.

 

[Shoemaker1955]

Do u have the inspire 1 camera mount complete?

Thanks

 

[Slozukimc]

If you still have the props I will take them. Shipping is to 14865. Thank you!!

 

[CoreySnipes]

Hello, I hope my enquiry finds you in good health and comfortable.
I'm a retired U.K. ex pat living as economicaly as I can in Bulgaria. I took interest in drones just before major hip surgery 2023 with a second hand Mavic pro. This spiked me to purchase vie eBay a complete set up of Inspire goodies, however on arrival from UK the seller negated to tell me the gimbal had suffered irrepairable damage. After lengthy mails to him and eBay I received a £100 refund which was put toward an Osmo. My thinking was to use the camera Zemuse on my Inspire. It has been a slow recovery from my operation and my hobbies all shelved until recently. The kit from UK includes 5 batteries loads of accessories of which no use unless I can complete the set up with fully functional Gimbal etc., Today after research took a blow to find the Osmo incompatible. Looking on this site I see you are/were in posession of cameras and I respect a while back. Do you still have items for sale? If so would it be possible to ship to Bulgaria? I'll meet shipping for sure. Worth a try..
Have a Wonderful day.

Hi, I can't ship outside the USA, sorry.

 

[CoreySnipes]

Do u have the inspire 1 camera mount complete?

Thanks

Are you looking for the standard mount (for the X3, Z3, or XT cameras) or the larger mount (for the X5 camera) ?

 

[CoreySnipes]

If you still have the props I will take them. Shipping is to 14865. Thank you!!

Ok, I will DM you to coordinate.

 

[Shoemaker1955]

Are you looking for the standard mount (for the X3, Z3, or XT cameras) or the larger mount (for the X5 camera) ?

X3 please.
Got pic?

Thanks much

 

[CoreySnipes]

X3 please.
Got pic?

Thanks much

Looks like the X3 has sold, sorry.

 

[Slozukimc]

Ok, I will DM you to coordinate.

Rcvd!! Holy propellers Batman! I will never run out!!

Thank you!!!

Mike

 

[Sky_Hawk]

I listed both vibration plates on eBay today. They come with hardware and screws, but no cables. Your existing cables from the X3 gimbal plug directly in to these.

Listings: DJI Inspire 1 Zenmuse X3/X5 Gimbal Camera Vibration Absorbing Board (#2) | eBay and DJI Inspire 1 Zenmuse X3/X5 Gimbal Camera Vibration Absorbing Board (#1) | eBay

Hi Corey! Do you still have the almost new drone that won’t come out of travel mode (the one without the bent screw?) if so, I’m interested! Thanks!
-Mke

 

[Sky_Hawk]

Hi Corey. Reaching out per our conversation, regarding several of your remaining items!
-Mike

 

[Sky_Hawk]

Hi Corey. Did you get my email, yesterday? THANKS!

 

[Sky_Hawk]

Hi Corey. You can contact me at either email address (Home or Work). Hope you had/are having a great weekend!
-Mike