AmazingTech 1345 propellers with adaptor

D

dbovard

Joined
Feb 24, 2016
Messages
6
Reaction score
0
Age
22
Propeller are literally the most important item you can select. Not even sure why you would consider some goodluckbuy garbage from a seller who cannot even spell aluminum.
 
Reactions: RBirtles
seanmclean said:
Propeller are literally the most important item you can select. Not even sure why you would consider some goodluckbuy garbage from a seller who cannot even spell aluminum.
Click to expand...
You are right! In the meantime we all trust DJI and apparently we shouldn't since many of us have lost a propeller in flight. I don't want to base my opinion simply on a spelling mistake but on the other hand I don't want to be a beta tester.

Envoyé de mon Nexus 7 en utilisant Tapatalk
 

I finally got mine after 40 days. If you are thinking of buying one, I suggest a quicker shipping method. Also the packaging it was in is terrible, a thin bubble wrap envelope that was torn and Canada Post wrapped it all in a sealed appology bag when they found it torn in that condition... Have not tried them yet bit looks pretty good and surprisingly undamaged.
 
kdownard said:
I order an Set from Infinity-hobby.com and they are amazing . They was well packaged and very fast shipping as it comes from CA Warehouse here is the link below
Infinity Hobby
Click to expand...

How much flight time do you have on these adapters? I'm currently trying to decide which adapters to go with for the T props but nobody seems to have any extensive flight time except with the expensive LP adapters.
 
emtea said:
How much flight time do you have on these adapters? I'm currently trying to decide which adapters to go with for the T props but nobody seems to have any extensive flight time except with the expensive LP adapters.
Click to expand...
I get a good 25 Mins of Flight Time with the TB 48 Battery and 20 Mins with the TB 47 but you have to take in fact that the wind was low between 5 -8 MPH and I wasn't flying very hard meaning top speed. here is what they look like before going on
 

Attachments

  • 20160410_100756.jpg
    649.2 KB · Views: 83
Reactions: emtea
What about the quality of the props provided and how well balanced are they out the box?
 
Nasscar][ said:
What about the quality of the props provided and how well balanced are they out the box?
Click to expand...

Just tested out the AmazingTech props, I did not do a hub balance, 3 of 4 were out of hub balance. These props are shorter than the standard dji ones and aren't as stable hovering especially if you have add ons. I suggest shelling out for real T-motor props and buy just the adapters for them.
 
Do you have any recommendation on good quality carbon props that would fit the build?
 
Nasscar][ said:
Do you have any recommendation on good quality carbon props that would fit the build?
Click to expand...

Authentic T-motor CF props best way to go else get a knock off brand at a fraction of the cost and get them balanced and if you are lifting anything other than an x3 get 14". 1448 is common size and pitch angle from what I've read.
 
I'm lifting the x5 camera and what is the bigest legal size props the inspire will support?
 
anv said:
AmazingTech I suggest shelling out for real T-motor props and buy just the adapters for them.
Click to expand...

Can you please tell me why it says on their site 2 Sets, over, and over, and over again, but they only show 1 set in the pics?

I mean, every single ad says 2 sets, (buts shows pics of 1 set)

I want to order these, but do not want to be disappointed by NOT getting what I expected. (everyone hates that)

I seen the infinitly hobby ones, no cw &ccw, don't like that.

I actually do NOT *need any kind of ST or QR, (would prefer straight bolt on) but ................. those plates out there have u "verb" out the t-motor 12mm prop hole distance 1/5mm each to 13mm, (no problem) but then simply shitcan the t-motor top plate ??? (you can't *verb that out 1/5mm of the counter sunk aluminum top plate) if you could, you wouldn't need any bottom plate at all, (just bolt it to the bell using t-motor top plate)

Didn't anyone even one time think of making a top plate with 2 13mm spanned holes, (we simply verb out the t-motor c/f props slightly, insert the brass center ring, and bolt right on to the bell.

Seriously, this is driving me nuts

ps - Tommy Bear on rc groups is a rude arrogant *** who I wouldn't buy water from if I were on fire, please don't mention him here again)
 

There exists such an adapter for just bolt on and verb the t motor props for a 13mm slot. Google dji t motor adapter. EBay same search will also give you the item you desire.
 
anv said:
There exists such an adapter for just bolt on and verb the t motor props for a 13mm slot. Google dji t motor adapter. EBay same search will also give you the item you desire.
Click to expand...

Also the AmazingTech adapter 2 pairs is complete set for 39 usd no worries if you go that route just long ship time in my case. It holds up pretty well just spin on then hand tighten a little (doesn't budge if spun on tight). Be sure to use a little loctite on the screws when mounting the plate to the motor and the mating plate to the props, no loctite on the spinon threadings.

Note the amazingtech adapters have 4 holes. 2 for 12mm span and 2 for 13mm span.
 
anv said:
There exists such an adapter for just bolt on and verb the t motor props for a 13mm slot. Google dji t motor adapter. EBay same search will also give you the item you desire.
Click to expand...

1) - Thanks bro - but didn't you read the part where you CAN'T verb out the t-motor top plate, (and screwing the c/f prop directly to the bell without top plate support is just foolish).
I'm going to pay the extra coin for the t-motor props and I plan on using all the hardware, (especially the top plate).

2) - please tell me if you get 2 pairs or 1 pair of the Amazing Tech adaptors. The description clearly says "2 pairs" and the pics clearly show "1 pair". (is it 2 pair for $35 or $70)
AmazingTech Aliminum Aadapter Quick Release Holder for DJI Inpsire 1 CW/CCW 2-Pairs $39.02 Free Shipping @GoodLuckBuy.com

and thx in advance for your help, I'm gonna order them
 
anv said:
Note the amazingtech adapters have 4 holes. 2 for 12mm span and 2 for 13mm span.
Click to expand...

Knew that - note that the "top plate" ones u mentioned on ebay do Not, (I would never trust just the 2 screws through the c/f prop with no top plate - no way
 

The direct bolt on adapter replaces the t motor top plate for a 13mm one. You just verb the props. But since you want to use the top plate then should get the amazingthech one since you can swap it. And yes, the 39 dollar ones are complete with 2 cw and 2 ccw adapters. Just need the props and you are good to go.
 
You must log in or register to reply here.

Similar threads

D
QR Props
Replies
1
Views
920
Inspire 1 Discussion
InspiredOne
Aircraft Aluminum Prop adapters for the I1
Replies
9
Views
3K
Inspire 1 Discussion
bluethundr
T
DJI Inspire 1 for sale with goodies
Replies
6
Views
2K
Classifieds
thepushercg
T
Menu
Log in
Register