Dead inspire 1 remotes.

[m00se]

Help connecting DJI go app

Hi guys, im trying to use an inspire 1 that I have had parked up for the last three years, I have been charging and discharging batteries etc over that time. I have it powered up, the remote connects and the light goes green, the camera responds to the wheel and I can start the motors, But...

inspirepilots.com

I have this thread running trying to get help connecting the remotes to the app. I thought I would start another one to get an idea of how many people have had, or do have dead inspire 1 remotes?
I now have 4 in my posession, they dont work, they have all been left for long periods of time, and then found to not connect to the app.
I have taken the rear modules with the usb on them from the remotes and put them into a working P3 system and they all work, There is no difference when adding the HDMI daughter board,
I have also added the USB board from the P3 system and found that the Inspire remotes continues to not work.
There must be something on the main board of the remote which stops working after a longish period of time,
I have even tried with a brand new, still sealed remote, but after charging it, the sysmptoms remain the same.

Any help would be great,

 

[Donnie Frank]

Between my partner and I we have 5 remotes, and they all work perfectly running FW 1.6.

D

 

[m00se]

have you ever left them for a long period of time without using them?

 

[Donnie Frank]

have you ever left them for a long period of time without using them?

My remote gets used at least twice a month. My partner's 4 remotes haven't been touched in months.

D

 

[MedicFL1]

I have 4 remotes and they are working fine, as Donnie's are. Is your firmware matching your A/C firmware or so far out from each other they don't work?
I'm guessing that you've already tried re-linking them.
If you need one let me know.

 

[Donnie Frank]

Any help would be great,

I left a solution in your other thread.

D