Firmware Update v1.2.0.17 Available
- Thread starter RJ Evans
- Start date
- Joined
- Feb 15, 2015
- Messages
- 72
- Reaction score
- 14
- Age
- 37
- Joined
- Feb 3, 2015
- Messages
- 1,882
- Reaction score
- 734
Upgraded. The aircraft update took maybe around 10min (didn't time) and ended with the "Fail" continuous sound, but rebooting did not initiate the process again. Remotes had to be upgraded before they would connect again, and the app reports everything as up to date.
Versions after upgrade are attached.
I see no visible difference in neither the iOS nor android apps.
Versions after upgrade are attached.
I see no visible difference in neither the iOS nor android apps.
No mention in the release notes of the compass issue resulting in unexpected ATTI switch from GPS.
I assume it's also included but it'd be nice to have confirmation.
I assume it's also included but it'd be nice to have confirmation.
- Joined
- Aug 7, 2013
- Messages
- 10,853
- Reaction score
- 5,723
- Joined
- Feb 3, 2015
- Messages
- 1,882
- Reaction score
- 734
I doubt it is part of it, as the opposite move was clearly part of the release notes this would likely have been too. It is also likely not the latest firmware Blade etc were testing lately as that had the option to disable automatic gear retract, which this upgrade doesn't have.
Not today, crazy windsNow...... you've got to be brave enough to go fly !!!!
- Joined
- Aug 7, 2013
- Messages
- 10,853
- Reaction score
- 5,723
Ta
Ohhh... So I've got to be the guinea pig have I???... Thanks!I doubt it is part of it, as the opposite move was clearly part of the release notes this would likely have been too. It is also likely not the latest firmware Blade etc were testing lately as that had the option to disable automatic gear retract, which this upgrade doesn't have.
Not today, crazy winds
Interesting... The RC shut down during the update process of the AC. Didn't hear the D-DD at all. I went ahead and updated the RC at that point and as soon as it was finished, and I rebooted the RC, I received an error saying the AC update had failed. I then turned off the AC and restarted it. After that everything worked just peachy.
The process didn't resemble anything close to what the documentation described.
The process didn't resemble anything close to what the documentation described
.
- Joined
- Aug 7, 2013
- Messages
- 10,853
- Reaction score
- 5,723
Tahoe or Blade....... Can you confirm (or not) that this FW version addresses the Compass anomaly and gimbal glitch that a lot of users have been experiencing?
There is no mention of either of these in the release notes.
Oh and if you are asking DJI...... can you also confirm (or not) that it is possible to roll back firmware if you find there is a problem with the new one? - I'm guessing not on that one but worth asking.
Thank You.
There is no mention of either of these in the release notes.
Oh and if you are asking DJI...... can you also confirm (or not) that it is possible to roll back firmware if you find there is a problem with the new one? - I'm guessing not on that one but worth asking.
Thank You.
Last edited:
Mine has been updating for about 40 minutes now
Don't know whether to let it continue or pull the plug
Don't know whether to let it continue or pull the plug
I guess I was under the impression that it would restart or shutdown. Anyway I powered down and backup and everything seems ok.
Polylawman...
From my post above:
"The RC shut down during the update process of the AC. Didn't hear the D-DD at all. I went ahead and updated the RC at that point and as soon as it was finished, and I rebooted the RC, I received an error saying the AC update had failed. I then turned off the AC and restarted it. After that everything worked just peachy."
Similar threads
