Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Hello from Hope, British Columbia Canada.

Joined
Aug 24, 2019
Messages
3
Reaction score
0
Age
66
Just got my Inspire 1 used, the price was good. I have progressed from the Spark, Phantom 4 to the Inspire. Flying the Inspire is like flying the Phantom 4 on steroids. One question I have is when the Inspire takes off it tends to list to the left, is this typical? ( camera facing forward) I installed new carbon fibre props calibrated the IMU and demagnetized with my CFixer.
 
Joined
Feb 13, 2016
Messages
156
Reaction score
31
Age
71
Location
Montreal
Website
www.photoimagerie.com
I have never seen any such problem. I assume yr props are all in good condition. I’d check the drone out carefully, make sure the legs are symmetric and angled correctly. Make sure there are no loose screws. Make sure nothing is twisted, maybe the drone had an accident previously. I believe u can find all the correct angles on the internet somewhere.
 
  • Like
Reactions: Keith T
Joined
Aug 24, 2019
Messages
3
Reaction score
0
Age
66
I have never seen any such problem. I assume yr props are all in good condition. I’d check the drone out carefully, make sure the legs are symmetric and angled correctly. Make sure there are no loose screws. Make sure nothing is twisted, maybe the drone had an accident previously. I believe u can find all the correct angles on the internet somewhere.
 
Joined
Aug 24, 2019
Messages
3
Reaction score
0
Age
66
Thanks for the reply Ralph, I have resolved my problem, when I checked the IMU it said IMU is ok, so I decided to do a full calibration (10 minutes) which corrected the problem. I an use to flying my Phantom 4 where you have to lay on a flat surface to calibrate. My conclusion is the Inspire does it a different way. Other things that are different is recording home point, Phantom does it straight away, the Inspire has to be started before it will record the hone point. It’s quite a learning curve.
 
Joined
Feb 13, 2016
Messages
156
Reaction score
31
Age
71
Location
Montreal
Website
www.photoimagerie.com
I calibrate the IMU occassionally, I use a spirit level to make sure it is perfectly horizontal in all directions. Glad the problem is solved, good luck, the Inspire is an awesome machine.
 

New Threads

Members online

Forum statistics

Threads
19,504
Messages
191,117
Members
28,854
Latest member
XapacheGuy