Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Help with Crystal Sky 5.5 and I2 controller HDMI only sending gray screen with audio levels to external monitors?

Joined
Feb 24, 2021
Messages
38
Reaction score
10
Age
58
I've tried several different HDMI displays including the Atomos Shoguns at various different resolution settings from both the Crystal Sky and the Inspire 2 remote and have yet to see the camera view.I just get a gray screen with the audio meters in the lower right corner. It's probably something obvious but any help getting this sorted out would be appreciated.

Thank you!
 
Joined
May 19, 2020
Messages
2
Reaction score
0
Age
66
I've tried several different HDMI displays including the Atomos Shoguns at various different resolution settings from both the Crystal Sky and the Inspire 2 remote and have yet to see the camera view.I just get a gray screen with the audio meters in the lower right corner. It's probably something obvious but any help getting this sorted out would be appreciated.

Thank you!
Had the same used patch antenna stronger received signal transmission all ok
 
Joined
Dec 13, 2015
Messages
931
Reaction score
497
Age
74
I've tried several different HDMI displays including the Atomos Shoguns at various different resolution settings from both the Crystal Sky and the Inspire 2 remote and have yet to see the camera view.I just get a gray screen with the audio meters in the lower right corner. It's probably something obvious but any help getting this sorted out would be appreciated.

Thank you!
You must set the system to output HDMI from either RC or CrystalSky device. This is done from within DJ Go/Go 4 app or CrystalSky setup. One of mine CS won't cooperate for whatever reason, but other does output HDMI and it is nicely received by Shogun ...
 
  • Like
Reactions: Four K Videos
Joined
Feb 24, 2021
Messages
38
Reaction score
10
Age
58
You must set the system to output HDMI from either RC or CrystalSky device. This is done from within DJ Go/Go 4 app or CrystalSky setup. One of mine CS won't cooperate for whatever reason, but other does output HDMI and it is nicely received by Shogun ...
As it turns out the HDMI output from the CS and the remote are both 59.97 fps regardless of what resolution setting I used. My Shoguns and a Feelgood HDMI display all work at that frame rate without a hiccup but I have one portable monitor that only reads 60p. Problem solved. Thanks!
 

New Threads

Members online

Forum statistics

Threads
21,793
Messages
207,936
Members
31,911
Latest member
lawerencewils