I2 Cinessd issue

[mediafriend]

I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

 

[The Editor]

I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

You have posted in the General section so we have no idea what aircraft you are talking about!
Aircraft?
Camera?
Firmware version?

 

[mediafriend]

The drone is an Inspire 2, using firmware 01.02.0500. I have the X7 with a DL 24 mm lens.

Post edited by moderator to remove duplication

 

[The Editor]

So now moved to correct section then....

 

[mediafriend]

The drone is an Inspire 2, using firmware 01.02.0500. I have the X7 with a DL 24 mm lens.

Post edited by moderator to remove duplication

Thanks

 

[Dobmatt]

I have a new 480G Cinessd card. The first time I started the drone with the card inserted; no problem. The next time I started the drone with the card inserted the drone was stuck in Atti Mode and I could not establish a home point. When I start the drone without the card; no problem. Anyone have an idea what's going on?

Apparently one of these system quirks, most likely not replicable. There's absolutely no way for SSD card to interfere with aircraft navigation ...