Lens Disconnected

[nitz]

I went to fly and a 'Lens Disconnected' error came up and I was no longer able to focus anything.
I've tried everything I can think of

• Cleaned lens contacts
• Reseated Lens
• Tried a different lens
• Tried a different gimbal
• Downgraded Aircraft firmware
• Attempted to downgrade controller firmware, but unable to
• Tried to switch between master/slave

I'm able to manually focus the lens on the actual lens, but inside the app -- nothing.
Anytime I try to calibrate it says pick something 50m away --- when I do, It doesn't allow me to press OK

Anyone have any tips/advice...ANYTHING

 

[Photo Elevate]

Which lens are you using?

 

[nitz]

Which lens are you using?

I've tried two x5s gimbals with the 15mm standard lenses
Also attempted to use a Lumix G 14-42 - with the same issue.

 

[Photo Elevate]

This may be a solution. On the 15mm lens there is a switch or pull out ring to select between manual or auto focus of camera.
Have you tried switching it to auto focus. In the app you can still manually focus.
Hope this helps.

 

[mmarian]

I went to fly and a 'Lens Disconnected' error came up and I was no longer able to focus anything.
I've tried everything I can think of

• Cleaned lens contacts
• Reseated Lens
• Tried a different lens
• Tried a different gimbal
• Downgraded Aircraft firmware
• Attempted to downgrade controller firmware, but unable to
• Tried to switch between master/slave

I'm able to manually focus the lens on the actual lens, but inside the app -- nothing.
Anytime I try to calibrate it says pick something 50m away --- when I do, It doesn't allow me to press OK

Anyone have any tips/advice...ANYTHING

It could be a wiring issue inside the gimbal mounting assembly in the antivib plate. The entire antivibration plate might need to be replaced.