NCORE - controller

[ACDS]

Hi pilots!

Did not find the information anywhere ...

It so happened that my drone crashed. When assembling, I noticed that there is one free connector on the controller.


Does anyone know and can say for what it can be used?

 

[JeffB2002]

Its not used on a regular basis. DSLR Pros has a FPV camera that you can attach to the I1 that uses that port for power.

 

[ACDS]

Its not used on a regular basis. DSLR Pros has a FPV camera that you can attach to the I1 that uses that port for power.

Good information .. I suspected something like that.
Can you give more information about connecting a FPV camera to this port or direct me to the desired search direction?

 

[JeffB2002]

Good information .. I suspected something like that.
Can you give more information about connecting a FPV camera to this port or direct me to the desired search direction?

DSLRPros Inspire 1 FPV Camera Upgrade

 

[ACDS]

Not exactly accurate information.
By reference, a camera is proposed that will be connected to an additional transmitter and an additional screen without software DJI or APP DJI GO

 

[ACDS]

If we have this connector for an additional camera, then, theoretically, we can connect a course camera to this connector (similar to Inspire 2 ).
Based on this information, the question arises - HOW?!

 

[JeffB2002]

Not exactly sure what you are asking, but that FPV camera connects to a wireless monitor. There is a transmitter attached to the I1. All the port is used for is to draw power. What it is EXACTLY supposed to be used for as designed by DJI, I have no idea.

 

[ACDS]

ОК.

So we will look for information and expect information from other pilots - maybe there are knowledgeable people.

The primary information gives the direction of motion ..!

 

[ACDS]

If you have an electrical circuit of this connector, it is possible to assemble a cable to connect the camera. It is theoretically possible, having two flight controllers - a pilot / operator, to obtain a FPV picture for the operator's controller.

Without installing third-party transmitters and other equipment.

 

[The Editor]

If you have an electrical circuit of this connector, it is possible to assemble a cable to connect the camera. It is theoretically possible, having two flight controllers - a pilot / operator, to obtain a FPV picture for the operator's controller.

Without installing third-party transmitters and other equipment.

No - the socket can be used for power. You cannot embed/interleave another video stream within the lightbridge transmission signal.
Why on earth you would want to add an additional flight controller is beyond me. Would be pointless and weigh more than a small 5.8ghz video TX.

 

[ACDS]

It's a pity..
But the electrical scheme of the output of the connector would be interesting to see.

 

[ShaimX]

Hello everyone, I am also curious on that extra port.... and thinking if possible to connect an DJI FPV Air Unit in it?...