Slave remote wants to Log-in??! WFT!

[BrenC11]

HI

Ive got no idea why this is happening but since updating to the new firmware whenever I load the Go app on on my slave controller I get the log-in screen. Some times it lets me get to the camera but most of the time it just holds on this DJI log in screen

Currently on a big shoot in the middle of the jungle for a major Tv station and having this happen is incredibly frustrating.

Any help would be very much appreciated.

 

[NickU]

Sounds like the new DJI Go login flight restrictions are kicking in sometimes!

Haven't got a clue how you can fix it, but first thought is to Try starting the slave rc after the I2 and main rc are both running, then start the DJI Go app on the slave. That way the slave rc should already be bound on to the master and it might not ask for the login as you should (!) be flying under the master's DJI login account.

Failing that, login on the slave if you can, and leave it logged in. If needs be, make a second DJI user ID specifically for the slave and leave it logged in as that one.

Hope one of those might help!

 

[Advexure]

Have you tried a removal and clean install of the GO App?

 

[BrenC11]

strange how its only doing it to the slave controller, going to try some things now.

 

[BrenC11]

I just loged in and out of all go app accounts. Seems to have fixed the issue. Not great if you don't have internet where you are flying and this happens. DJI need to sort it out.