Welcome to InspirePilots.com

Join the leading DJI Inspire community for free!

Transferring CinemaDNG and ProRes Licensing

Discussion in 'Inspire 2 Discussion' started by Florida Drone Supply, Jun 25, 2018.

  1. Florida Drone Supply

    Approved Vendor

    Joined:
    Dec 8, 2016
    Messages:
    1,566
    Likes Received:
    682
    Transferring your CinemaDNG and Apple ProRes licensing appears to be getting easier. You have to own 2 Inspire 2's with licensing on one of them. The process involves calling DJI, we contacted them by using their USA phone number. Before you call, have the aircraft serial numbers written down and be prepared to connect both Inspires to the Assistant 2 App. You will have to have a good reason for doing this and possibly have a bill of sale for both and be ready to share these with DJI.

    This process can take a couple of days, so do not start it on a Thursday or Friday like I did especially if you have a job that requires this licensing!! You will call them and give them the info they require. They will send you an email asking for 1 additional piece of information, after that is provided they will send you an activation code for you to use when you activate your licensing in the Assistant 2 app on the new recipient aircraft. After that, start up your I2 with an SSD and SD card installed and verify that all is working.

    I hope this helps and answers some questions regarding licensing transfers.

    Jim
     
    sactownjames, CP Anson and The Editor like this.
  2. CP Anson

    Joined:
    Mar 20, 2017
    Messages:
    146
    Likes Received:
    64
    Location:
    Portland, OR
    Great information! Thanks for posting this.
     
    Florida Drone Supply likes this.
  3. Florida Drone Supply

    Approved Vendor

    Joined:
    Dec 8, 2016
    Messages:
    1,566
    Likes Received:
    682
    Apparently DJI's thoughts on this have changed. We have a client that tried to do this and was denied. More info to follow.