im in auburn ma. united states
us moneys
Hey guys and gals, this is you chance to get a "unlocked" DJI Inspire 1 pro..........................FULL DISCLOSURE
fully rebuilt but no x3 camera and the nvidea shield is not included
2. i bought it for 300.00, screws missing, no camera, the NCORE 1/2 was damaged, video works but controller was dead no front mount, torn cables
WHAT I DO KNOW
1. bought a used controller, best firmware, 1.06.01.00 (i think best for unlock)
2. new old stock NCORE, 200.00
3. dji inspire 1 screw kit ,14.00
4. drone was set up with the X camera..............(not included) 1.08.01.00 i think best for unlock
5. the unlock is what you would get from flyflydrones, to controversial to talk about........SO "PM" ME
6. some friend 3d printed new mount out of carbon fiber, my design, but had someone else print for me
7. this is a inspire 1 v.2 pro, you know what the worth is
8. NO CASE, (if your local we can talk about a phantom 4 inspire GPC case, but to ship will cost to much)
SHE IS UP AND RUNNING, THIS IS WHAT YOU GET
1. very clean low use inspire 1 v.2 pro UNLOCKED no camera
2. 1- tb47 battery
3. 1-stock inspire controller with hdmi
4. stock props
5. X5 mount all ready to got, (but you must upgrade FW)
ok i have 700 into this drone, so make and offer i cant refuse
pm me for any info
i have those 250 folding props i can add for more $$$$
i took on this project just to practice a repairs, i have 2 inspires now, (and others) and dont need this one just collecting dust
thanks for looking
oh it will be packed well, but does not have a case either
us moneys
Hey guys and gals, this is you chance to get a "unlocked" DJI Inspire 1 pro..........................FULL DISCLOSURE
fully rebuilt but no x3 camera and the nvidea shield is not included
WHAT I THINK I KNOW ABOUT THE INSPIRE
1. it was in a landing crash, legs where up, and so wrecked the x5 camera, front mount, and 2 cables for camera.and a common problem when they get bumped hard, you lose ncore...no other damage was found, i went thru the whole drone, besides a little dust, it dont look to have much flight time before the crash2. i bought it for 300.00, screws missing, no camera, the NCORE 1/2 was damaged, video works but controller was dead no front mount, torn cables
WHAT I DO KNOW
1. bought a used controller, best firmware, 1.06.01.00 (i think best for unlock)
2. new old stock NCORE, 200.00
3. dji inspire 1 screw kit ,14.00
4. drone was set up with the X camera..............(not included) 1.08.01.00 i think best for unlock
5. the unlock is what you would get from flyflydrones, to controversial to talk about........SO "PM" ME
6. some friend 3d printed new mount out of carbon fiber, my design, but had someone else print for me
7. this is a inspire 1 v.2 pro, you know what the worth is
8. NO CASE, (if your local we can talk about a phantom 4 inspire GPC case, but to ship will cost to much)
SHE IS UP AND RUNNING, THIS IS WHAT YOU GET
1. very clean low use inspire 1 v.2 pro UNLOCKED no camera
2. 1- tb47 battery
3. 1-stock inspire controller with hdmi
4. stock props
5. X5 mount all ready to got, (but you must upgrade FW)
ok i have 700 into this drone, so make and offer i cant refuse
pm me for any info
i have those 250 folding props i can add for more $$$$
i took on this project just to practice a repairs, i have 2 inspires now, (and others) and dont need this one just collecting dust
thanks for looking
oh it will be packed well, but does not have a case either
Last edited: