Whats changed in the latest android 1.07 software?

crashburn · Feb 25, 2015

Havent had time to use it yet… functional optimization?

Enjoy life and be nice

DJeff1 · Feb 25, 2015

No flight simulator yet.

CoastalBird · Feb 27, 2015

Tahoe Ed has confirmed that there's a video bug in the 1.07 Android release. http://forum.dji.com/forum.php?mod=viewthread&tid=9026&extra=page=1&lang=en

sdjackaerial · Feb 27, 2015

NVIDIA Shield--worked great today for 2 flights. On and off with 3 batteries.

The Editor · Feb 27, 2015

sdjackaerial said:
NVIDIA Shield--worked great today for 2 flights. On and off with 3 batteries.

+1 Working fine here on Nvidia shield running up to date Lollipop.

Kilrah · Feb 27, 2015

Working fine on my 4 android devices.

crashburn · Feb 27, 2015

Worked fine on my Shield until last flight (of 3), then got dreaded compass error and switching to atti messages. Also noticed when I switched from tb47 to tb48 the initial hover after takeoff wasn't stable, going up, until I played around with controls. Maybe the new just released firmware will help.

Enjoy life and be nice

Kilrah · Feb 27, 2015

That has nothing to do with the app indeed.

GizaDog · Feb 27, 2015

I like this update a lot. No more compass error after taking off and the video is way more stable now. Thanks DJI!

stuart steinfeld · Mar 1, 2015

crashburn said:
Worked fine on my Shield until last flight (of 3), then got dreaded compass error and switching to atti messages. Also noticed when I switched from tb47 to tb48 the initial hover after takeoff wasn't stable, going up, until I played around with controls. Maybe the new just released firmware will help.

Enjoy life and be nice

That issue is in the bushings on the arms. But you need to open one side up and break the warranty seal. A piece of electrical tape fix's that

thumpinhard · Mar 1, 2015

stuart steinfeld said:
That issue is in the bushings on the arms. But you need to open one side up and break the warranty seal. A piece of electrical tape fix's that

true..but it depends on how loose or tight it is.
i used different sized pieces of a plastic bottle on mine (about 3/8" and one smaller).
you need to remove the lower arm that makes it pivot and move the main arm to be certain it does not bind. you want it to not wobble but not bind when moving..very important to the life of the screw mechanism.
one note: mine is in for repair work..i will report back if they void my warrantee because i did this. (esc and two motors inop and esc error)

crashburn · Mar 1, 2015

thumpinhard said:
true..but it depends on how loose or tight it is.
i used different sized pieces of a plastic bottle on mine (about 3/8" and one smaller).
you need to remove the lower arm that makes it pivot and move the main arm to be certain it does not bind. you want it to not wobble but not bind when moving..very important to the life of the screw mechanism.
one note: mine is in for repair work..i will report back if they void my warrantee because i did this. (esc and two motors inop and esc error)

I suspected that it might be related to mechanical issues and intend to go over the wiring, loose legs, etc, over the next week or so during this bad weather. Hopefully, a tightening up, electrical tape, etc, will help the occasional loss of gps and compass issues.

Enjoy life and be nice

thumpinhard · Mar 8, 2015

crashburn said:
I suspected that it might be related to mechanical issues and intend to go over the wiring, loose legs, etc, over the next week or so during this bad weather. Hopefully, a tightening up, electrical tape, etc, will help the occasional loss of gps and compass issues.

Enjoy life and be nice

the loss of video and gps is f.w. related. mine has been better and now worse again after updating…at least in my case and many others.