Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by flothepirate

  1. F

    Turning on TB50 batteries?

    Finally done - powering whatever I want :) #stormtrooper
  2. F

    Turning on TB50 batteries?

    This is the way i ended up going , if you open up the plastic you can source a pcb that handshakes with the battery and you can directly attach thick power cords (awg10) directly to the 4x plus and 4x minus pins and draw all the power you want ... no need for a custom pcb ... sorry Josh for...
  3. F

    Turning on TB50 batteries?

    Thanx for letting me (us) know!
  4. F

    Turning on TB50 batteries?

    are you for real letting me hang here and not sharing the answer to the problem? I mean come on man you came here taking the time from the community and when it´s on you to give back you don´t share your knowledge ? I would have expected you to come back here and present the answer if you found...
  5. F

    Turning on TB50 batteries?

    you mind sharing your wisdom ?
  6. F

    Turning on TB50 batteries?

    did you find any answer ? thx
  7. F

    inspire 2 cendence problem

    I actually did that but it didn´t reset the firmware of the cendence , only go4 got reset. I think the main problem solver was to downgrade the cendence firmware
  8. F

    inspire 2 cendence problem

    PROBLEM SOLVED - all buttons can be programmed again - lesson learned : just reinstall everything ;) what helped was to reset the firmware on cendence and reload the latest one again as well as reinstalling the latest Go4 app how to reset firmware on the cendence : press and hold the three...
  9. F

    inspire 2 cendence problem

    thanx for your reply! i did a factory reset on the crystalsky and i think it downloaded the latest go4 app but it wasn´t connected to the cendence when doing this. I think crystal wouldn´t do anything to the cendence , there must be another way to reset the cendence. if anybody has more ideas...
  10. F

    inspire 2 cendence problem

    Thanx for your reply. I remember when I had the crystalsky freezing up one mid flight but since being on the latest firmwares i2 .300 it never happened to me again. Everything was working really till the inspire2 got swopped out .... having this confused cendence is a mystery ... anybody know...
  11. F

    inspire 2 cendence problem

    Hi , if anybody can point me to a solution of this mistery I would be very thankful ! problem: I used Inspire 2 with stock controller for the pilot and Cendence to controll the gimbal. I used Crystalsky on both controllers. I loved how I can adjust the gimbal pitch and yaw speedwith the two...
  12. F

    Signal Booster for Inspire 2

    In europe signal strength is limited by law to lower watts so the go4app will adjust the parameters depending on where you are. Also not legal there are ways around it ....
  13. F

    Signal Booster for Inspire 2

    It never made it to the stores ...
  14. F

    Inspire 3???

    i think the next thing we see is an Inspire 2.5 - upgraded motors with more power and ocusync - very little change to the overall appearance, we will be still using tb50 and x7 but maybe x8 might be around the corner and hopefully tb90 works out :)
  15. F

    Tb50 custom builds

    one easy way to use the tb50 for custom builds ( I use them to power a red camera ) is to get the ronin 2 battery cradle - there are two 14.4V d-tap connections. I was also looking into powering a cable cam with the TB50s but people advised me to not do it - you can read everything here ...