Recent content by Grahos

Yes mine was very tight too but just needed a good pull

Thanks for that it seemed to solve the problem

No I didnt get any message and the FPV camera image was still there, It was just the main camera image that disappeared'

Yes the Firmware is up to date.. Could be the contacts to the camera. Tried to clean them. It only happens intermittently though.

I have used the Inspire with the X5s for photogrammetry and tried it with different lenses.. Seems to work well with the standard 15mm lens and around 30m above ground level. I use Drone deploy. I tried the same mission with the 45mm lens and it needed to fly at 120m but the result wasn't as good.

Thanks for that. I'll set up the custom guides

I had the same problem and I cleaned the contacts and it doesnt seem to happen any more

I would like to be able to set the camera to shoot 3:2 aspect ratio and on the X5s only 4:3 and 16:9 is available. The P4Pro has 3:2 option in the settings. Surely this could be an option on a machine that gets used commercially and images are shown with standard 35mm format images. I shoot in...

Mine has just clocked 24 hrs and it has no signs of wear.. My P4Pro has done 91 hrs and it also shows no signs of wear so 26hrs is practically brand new