We recently replaced two motors on our I2 and it’s relatively easy. You need to remove the landing leg, by first loosening the 4 screws that are visible which hold on the little outer cover on the front of the leg. It then prys off by putting a very small screw driver under the middle of that...
Had a chance to fly yesterday with the Crystal Sky Ultrabright. Temperature was in the high 70’s. We flew 1 full battery on the Crystal Sky and shortly after we changed batteries received the overheating warning on the CS. We used a thermal temp gun and the screen was getting to about 115ºf...
Setting up new Cendence RC and after about 20 minutes we received an overheating warning on the 7.5" Ultra Bright, crystal sky and it was indeed very, very hot. We are in Yuma AZ and were sitting in the shade of the garage, temp was about 72 so not hot. Will try it with the 5.5" Crystal sky...
Has anyone found a decent lens hood for the 12mm that you can use with a polarizer or other filters? The only one I have found is the official Olympus square metal hook=d, however you can't slip it on over the polarizer. You can install the polarizer after the lens hood is on, but it's nearly...
So we called DJI tech support this morning. When we called the unit was still not giving us a video feed on the Osmo. Tech support had us put it back on the Inspore and miracle of all miracles, we got a video feed. Then when we switched it back to the Osmo...yep we now have an audio feed and...
We've been using our X5R on an Osmo and in our Inspire1. We turned on the Osmo this morning after we installed the Z Axis arm to build a fix so the X5R would work on the Z Axis, which incidentally worked great, however now we have no picture in the DJIGO app. We checked all the connections and...
We have a nearly new X5R for sale for $2,000.
My email is [email protected]
We're using it on our Inspire and Osmo, but it's too noisey for the osmo so bought an X5.
Thx...Jim Watt
Nearly new, less than 20 hours, perfect condition: DJI Zenmuse X5R Gimbal Camera/recorder with 1, SSD card, card reader & case. Caps for all openings: no lens.
I'm based in Seattle, Wa. USA
$2,200 OBO
Direct email: [email protected]
thx...jw
We charge $2,200 a day for any kind of job whether it's stills or video, raw or H264. That's with pilot and DP dual control Inspire 1, multiple lenses from 12mm-45mm & with Phatom 4 as backup. Editing is $100 per hr.
Jim Watt
We've used the inspire & X5R in the last 5 minutes of evening twilight on a cloudy night with excellent results with ISO 400 and 800 at f2.8 & f4. This was shooting a 7+ million dollar house with exterior lights on and a few lights in the house, golf course behind.