Recent content by Milton

Well, I think it showed me, I am very inexperienced on the subject, I apologize and correct me if I'm wrong, but my intention is to put an extra load 1.354g made a spreadsheet for flight time prediction, but I am concerned about this extra charge. Capacity: 3000mAh Voltage: 6S1P / 6 Cell /...

I found this battery, I wonder if it meets the specifications for coplar in TB48. Capacity: 5200mAh Configuration: 6S1P / 22.2V / 6Celulas Constant discharge: 10C Peak descargaDischarge (10sec): 20C Weight: 643g Size: 142 x 49 x 43mm What do you think?

Ok I researched the internet and found some models of batteries that possess temperature between 30-95C for the weight of the camera with 545 grams which type of battery mah I can use to match the TB48.

I would like your help and I will give a brief account of my operation. I use the Inspire with X3 to make ortophotos, and recently put a new camera Sony A6000 with 545 grams in the Inspire axis, and my TB48 batteries with FW 1.6 has shown a yield of flight 9-10min, however the issue of...

It's interesting, but the temperatura of battery and or motors not overheat? I put A6000 and the temperature stops at 157F.

And the DJIGO you cant fly autonomous but has better telemetry of fly, and the X3 I use to see the interference, obstacles like birds, trees and power transmission lines.

OK, but the problem is related to quality of orthophoto, with the camera Inspire 85m above the ground accuracy is approximately 3,94cm GSD with the same altitude with Sony A6000 accuracy of orthophoto goes to 2,02cm, the sensor size of the Inspire called X3 or FC350 has 6,41mm, size sensor Sony...

No, my temperature was 26-28C and a gentle breeze, so do not understand what's going on, I'm more than 240,000 meters and over 14 hours of flights performed in this region.

I always since buy Inspire 1 placed the camera on board like Canon S100 and GoPro together, and the time of operation flight stay flying 14-15 min, and the safety flight time of DJIGO with bar of time return home never fail, always came with temperature with 86F. But I don't understand what...

I always, since buy Inspire 1 placed the camera on board like Canon S100 and GoPro together, and the time of operation flight stay flying 14-15 min.

I installed Sony A6000 with 545g, but I always use with other camera with 500g like Canon, and before the Firmware 1.60 never this showed on operation one fail safety.

With the Sony A6000 installed on Inspire, how long can perform flight?

] I don't understand what happing, I1 fly with the TB48 I realized that when moved could not keep low speeds, and 9-10 min starts appear to battery voltage in yellow and with 45% load, but the return of security bar and safefly say I'm with 3min operations, I was afraid of a power failure and...

OK, It's more easy, but the altitude only of barometer or can rec SRT with GPS altitude.

OK, but I'm using Sony A6000 with timelapse 2s.