Recent content by papaxiclas

Hello, Just to let know that I am selling my little used X4S on ebay. If anyone want's it just jump in. https://www.ebay.com/itm/202703932403 Thanks

That is the fine! The sensors are disabled when the landing gear is lowered! Try to move the landing gear in flight and confirm that is the case!

It is a simple choice!:) CS 7 high brigh! I have the high and the ultra and the ultra burned out the backlight 2 times in 6 month of use in lower 30°C temperatures. With the sunshade there is no significative difference on day2day use.

You can try to land on ATT mode. I use it werever there is too much wind or the ground is not level. The throttle behaviour at landing is "less automatic" when in Att mode.

Realy? Does it work correctly with the 16mm lens?

Not really. As far as I know I will probably pay more than the price of a new one:) Thanks

Yesterday the landing gear stopped working and the problem is with the position sensor/encoder. The drone is 3 months old and while it is under warranty I really cant afford the down time for the warranty repair process. I am thinking of buying the replacement mechanism and do the replacing in...

I solved that problem with an X7 by just putting in the original SD card formatted in my desktop. Without this procedure the update process failed at 73% and I was unable to update the camera!

Yes sure, This was a speed run in sport mode with the 50mm lens looking for stability problems DJI_0019.MP4

I have flown already with the stock "unbalances" and there is no problem with the gimbal stability or other issues! Even doing 100km/h with the 50mm!!!!:D

That was my first approach but it didn't work. Without the camera the update of the drone runs smoothly. With the camera it crashes. I am reverting the bird to the old firmware an try to "refresh" the 01.0200 version with the x7 on. Hope your luck is better than mine!! :) Are you doing the...

Yes, tried with assistant and it stops at 73%. With the CrystalSky it reaches 80% or 19% of the "camera" update

I am trying to update for about 3 hours now and no success! It reaches the 73%, reboots a few times and fails. Anyone had success in the update?