Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by Ryan Sigler

  1. Ryan Sigler

    ND Filter Issue

    New filters came in today and after some good indoor testing, I am 95% sure its the lense. The blur is there all the time, with or without filter and have figured out the amount of blur is directly effected by aperature. More wide open such as F2 is very blurry on the edges, more closed starting...
  2. Ryan Sigler

    ND Filter Issue

    no, those are the .jpg photos. I realize they are junk photos, but I was messing with focus and the settings so I'm sure it was off. Yeah, I know it's the filter because it has been nothing but junk since I have tried it. I am just now revisiting the issue as I run no filters at all and get a...
  3. Ryan Sigler

    ND Filter Issue

    here are two photos showing the edge blur. This is with the firecrest IRND ND1.5 filter. F4.0, SS 60, ISO 800 or so. I focused a few times. The courthouse is in focus but the edges are blurry as hell. It is cloudy and a very light drizzle, but either way the edges are blurred. This is what I...
  4. Ryan Sigler

    ND Filter Issue

    I appreciate the info. I am going to do some testing in the next few days, with different filters and setting. I'm thinking about getting a pani 42.5mm lense as well.
  5. Ryan Sigler

    ND Filter Issue

    I don't have a video of it off hand but the next time I do testing I will save the video. Thing is, I shoot with F16 all the time. It works great for me. Everything is sharp, my videos are good quality and have no complaints other that I could have better color. As soon as I added the Ficrest...
  6. Ryan Sigler

    ND Filter Issue

    I am using the dji x5 lense the 1.7. I focused it in using 16 aperature and pretty much run that because it's hard to get it dark enough. Obviously with the filter I knocked down the aperature to as low as 5.6 because it was cloudy the day I tested my filter. I tried playing with the...
  7. Ryan Sigler

    ND Filter Issue

    I have a Firecrest 1.5 ND Filter, and I have tried to use it several different times and did some testing today to see if I can get it dialed in. After putting the filter on and adjusting ISO & Aperature to a decent settting, the edges of my video are blurring. The video is blurring enough that...
  8. Ryan Sigler

    Inspire 1 Antenna Cable Repair

    Because they don't leave any extra cable and it pulled probably an 1/8" to 1/4" off of wire when it separated.
  9. Ryan Sigler

    *SOLD* Inspire 1 Pro w/ X5 Camera

    DJI MAVIC AIR + $800....you keep the 15mm, olympus and the x5 lenses?
  10. Ryan Sigler

    Inspire 1 Antenna Cable Repair

    During an attempted motor swap on my inspire 1 pro...the Antenna Cable in the landing gear separated from the Antenna Receiver. To replace the cable (becuase DJI isn't smart enough to allow any extra slack) a new cable would have to be ran all the way back to the center of the bird. I have...
  11. Ryan Sigler

    Inspire 1 Pro

    Still available? would you accept a DJI Mavic Air as a partial trade and the rest cash?
  12. Ryan Sigler

    Inspire 1 Firmware update issue 7/10/17 v 01.11.01.50 .

    After i erased my ipad and reinstalled the app and put the update back on the sd card and powered it up under each battery before i went out. I havent had the flight restrictions anymore. I do power the app down everytime i switch batteries and turn it all back on. Seemed to work. I am however...
  13. Ryan Sigler

    Inspire 1 Firmware update issue 7/10/17 v 01.11.01.50 .

    Perhaps i had to wait for a few minutes to update idk.
  14. Ryan Sigler

    Inspire 1 Firmware update issue 7/10/17 v 01.11.01.50 .

    Running x5 cam and i left the .bin file on the sd to update batteries.
  15. Ryan Sigler

    Inspire 1 Firmware update issue 7/10/17 v 01.11.01.50 .

    No, just did it last week.