Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by Tom4Inspire2

  1. T

    Video distortion caused by RID module?

    I moved the RID module to the underside of the I2 where it is farther from the cinecore unit. Have not seen this interference come back. Previous mount location was on top of the I2 right above the cinecore. I am writing to an SD card. And yes, the Dronetag Beacon has worked just fine.
  2. T

    I2 remote ID

    FYI I just experienced video interference that i believe might be coming from my Dronetag RID unit. I had mounted it using the 3M super Velcro stuff (duralock?) near the nose of the aircraft, and in hindsight, right on top of the processor for the I2. Going to try with it mounted to the bottom...
  3. T

    Video distortion caused by RID module?

    Just curious if anyone else has experienced this. Finally got my dronetag beacon, and on my second flight with it, 2 out of 7 videos had lines through the video that made the video useless. It wasn't until later that I started thinking the cause might be that I had nose-mounted the beacon...
  4. T

    I2 remote ID

    I just checked, and the Inspire 2 is not listed on the FAA's compliant list. So whatever they did, it doesn't have an accepted MOC so far.
  5. T

    I2 remote ID

    So I was on a job yesterday downloading zone unlocks, and prompt came up for a firmware update. The description said the update included support for remote ID in the US. I did not want to attempt an update in the field on a job, but wondered if anyone else has seen this or tried it?
  6. T

    I2 remote ID

    Word has it that the 9/16 effective date is being pushed back. A YouTube video I watched shared an email from the FAA saying there would be a more official announcement soon.
  7. T

    I2 remote ID

    The toggle is there, but that doesn't mean the hardware is capable of being compliant. The remote ID option for the I2 on DJI Go predates the RID specifications by several years.
  8. T

    Looking for an inspire 2

    If it's not that ribbon cable that connects the camera mount to the processor, I can't imagine where else you'd be able to fix it.
  9. T

    I2 remote ID

    I plan to use a remote ID module that has a declaration of compliance that has been accepted by the FAA. That means the FAA certifies that my module meets all requirements. Problem solved.
  10. T

    I2 remote ID

    That's true for newly manufactured drones, but not for older drones with a RID module, ans Ironsky explained quite eloquently.
  11. T

    I2 remote ID

    Curious what my fellow US-based I2 owners are planning to use for Remote ID? Not a lot of options so far, but maybe I'm missing some products out there?
  12. T

    Got inspire 2... should I get the 3 or wait for the 4

    Based on their track record with the inspire line, the Inspire 4 will come out in 2030.
  13. T

    Saw Inspire 3 at NAB (with photos)

    And the 18mm of full frame is effectively wider than the 16mm on the X7 due to crop factor, so no real loss in terms of field of view.
  14. T

    DJI Inspire 2 - High end set up

    Wow, wish I was in the UK!
  15. T

    Inspire 2 complete kit (just not getting used enough)

    Which camera? You prefer someone who is local to... where?