Fly in FPV with locked pan and tilt free ?

Inspire2 · Mar 20, 2017

Hello,

I would like to fly in fpv with locked pan and give only the tilt control to my camera operator. Is it possible ? Since last firmware it's not !

I

Reinier · Mar 20, 2017

Don't you mean locked yaw? or really locked pan?

Inspire2 · Mar 20, 2017

Yes locked pan on the yaw's inspire 2. So I frame the pan in fpv and my camera operator frame the tilt.

NickU · Mar 20, 2017

Tell them to leave the gimbal in follow mode instead of switching over to free mode. Then it should stay with the aircraft heading and they can just tilt it.

Inspire2 · Mar 20, 2017

It was possible before last firmware but not with the new one.

NickU · Mar 20, 2017

Go4 4.0.5 or 4.0.6? They mentioned restoring something for 2nd gimbal control in notes for 4.0.6.

Inspire2 · Mar 20, 2017

4.0.5, so i will update to 4.0.6 today to see if it restore that. Thank you NickU

Jason Boucher · Mar 20, 2017

Why don't you just add a custom mapping of the controls on the slave controller and only map what functions you want him to have. If you only want him to tilt the camera up and down, then only assign those functions.

Inspire2 · Mar 20, 2017

Because in free mode if i play with yaw's inspire the x5s's pan will not follow

Inspire2 · Mar 20, 2017

4.0.6 don't change anything. We can't have follow mode on pan and free in tilt from slave remote.

Fly in FPV with locked pan and tilt free ?

Similar threads

Privacy & Transparency

Privacy & Transparency