FW Failure

Rickesco · Jan 24, 2016

HeyTeam,

I need some assistance please.. I tried to upgrade the FW to the latest (1.6.0.40) right off the bat the inspire started to beep and continues with not change, even after several attempts. The camera did it's thing then went back to front view, tilted and started to shutter.
The DJI App gave me the following error: " MC connection to center board failed" "Gimbal cannot receive MC data"
Any thought?? No crashes, Fully charged battery was used, Radio was fully charged.

FlyHighUSA · Jan 25, 2016

Rickesco said:
HeyTeam,

I need some assistance please.. I tried to upgrade the FW to the latest (1.6.0.40) right off the bat the inspire started to beep and continues with not change, even after several attempts. The camera did it's thing then went back to front view, tilted and started to shutter.
The DJI App gave me the following error: " MC connection to center board failed" "Gimbal cannot receive MC data"
Any thought?? No crashes, Fully charged battery was used, Radio was fully charged.

I would try replacing the SD card and re-downloading the firmware. Make sure you have the Bin file only on the SD card. Otherwise it will not work.

The Editor · Jan 25, 2016

Rickesco said:
HeyTeam,

I need some assistance please.. I tried to upgrade the FW to the latest (1.6.0.40) right off the bat the inspire started to beep and continues with not change, even after several attempts. The camera did it's thing then went back to front view, tilted and started to shutter.
The DJI App gave me the following error: " MC connection to center board failed" "Gimbal cannot receive MC data"
Any thought?? No crashes, Fully charged battery was used, Radio was fully charged.

I assume you didn't attempt the update of the aircraft with the RC switched on?!

Rickesco · Jan 25, 2016

Yep... Before I realized it was on, it had already started the upgrade.

The Editor · Jan 25, 2016

Rickesco said:
Yep... Before I realized it was on, it had already started the upgrade.

And have you tried reinstalling/upgrading the aircraft correctly now with the RC turned off?

Rickesco · Jan 25, 2016

Well I solved the problem. Here is what I did.
I formatted the SD card and placed a fresh copy of the BIN file. I placed it in the camera and with the radio off I started it up. It was still doing the same thing (Beeping and yellow light flashing) I let it sit there and after approx 40 minutes it stopped beeping, the camera went back to front view and the FW started to upgrade. After 25 minutes or so the FW finished upgrading and the Inspire is back. Don't know what happened but I think since the radio was on it hosed everything up. Back to flying... thanks for your comments..

FW Failure

Rickesco

FlyHighUSA

The Editor

Rickesco

The Editor

Rickesco

Similar threads

Privacy & Transparency

Privacy & Transparency