Inspire 2 gimbal issue after crash

[borevit]

Hi fellow droners. I recently crashed my drone. Due to improper mounting of propellers one of them came off on about 1.5m and caused the drone to fall on the ground. After replacement of the propellers the drone flies as it should and the camera works, but I noticed that it goes crazy when I tilt my drone 90 degrees, as shown on the attached video. While such situation won't occur in a normal flying conditions it still concerns me and I would like to get it fixed. Does any of you ever had a similar situation or knows what might cause the problem?

inspire 2 zenmuse x4s gimbal issue

• borevit
• Mar 14, 2018

 

[dioriosigns]

hi don't have that problem. but i crash my and lost autofocus. the problem is the wire that goes to the gimbal is to short and pulls the wires out on impact .