I've been flying today and drone? It did his own way...

Joined
Aug 20, 2014
Messages
43
Reaction score
0
Hello,

I'm writing there, because today after my first take off (calibration and so) my drone started going left and down after half a minute, I couldn't get the control back, it reached a high electricity power cable, and fallen down from 10 meters. The result looks so good. The carbon wings are broken, and some plastic parts.

What should I do? MicroSD lost. Camera not looks bad. Contact DJI?

Thanks in advance,
Marcell
 
Were you flying an Inspire1 ? Have you got your flight record on your tablet?
 
Oh yes, of course!

This is where I lost control and started going away.
 

Attachments

  • image.jpg
    533.2 KB · Views: 47

What firmware version, what app version?
During your pre flight checklist what were your mod values prior to take off?
Did you take off with a fully charged battery?
 
What firmware version, what app version?
During your pre flight checklist what were your mod values prior to take off?
Did you take off with a fully charged battery?

Hello,

The app way the last version, the firmware is the last-before one.
I had default settings, I didn't mod anything at all.
Battery was 100% as I went up.

So strange...
 
Hello,

The app way the last version, the firmware is the last-before one.
I had default settings, I didn't mod anything at all.
Battery was 100% as I went up.

So strange...
No, what were your IMU mod values immediately prior to take off?
  • Gyroscope
  • Accelerometer
  • Compass
Please advise what these values were when you checked them before your take off?
 
No, what were your IMU mod values immediately prior to take off?
  • Gyroscope
  • Accelerometer
  • Compass
Please advise what these values were when you checked them before your take off?

Well, I cannot remember the values, but everything was normal. But I did the IMU calibration and it was successful.
 
No, what were your IMU mod values immediately prior to take off?
  • Gyroscope
  • Accelerometer
  • Compass
Please advise what these values were when you checked them before your take off?

Or is there any way to check it from the fly log??