No signal, FW 1.9.1.3, Cam 1.8.1, TX 1.6

W

Winston

Joined

May 2, 2016

Messages

27

Reaction score

1

Age

45

• Jul 10, 2016

• #1

Just rebuilt my damaged Inspire and attached the new X3 camera to replace the water damaged predecessor.

Started up for first time, firmware update required - so did the update. Now GO app is saying everything is up to date (if I try to do another update I just get a continuous beep). Now I am connected to the aircraft but no signal / video feed.

Any suggestions?

 

L

Leszek Kedziora

Joined

May 22, 2015

Messages

83

Reaction score

29

• Jul 10, 2016

• #2

Try to put up with one hand the drone and switch 3 oraz 4 times the lever on the remote. Then restart the drone.

 

Mad_angler1

Joined

Dec 9, 2015

Messages

756

Reaction score

378

• Jul 10, 2016

• #3

Winston said:

Just rebuilt my damaged Inspire and attached the new X3 camera to replace the water damaged predecessor.

Started up for first time, firmware update required - so did the update. Now GO app is saying everything is up to date (if I try to do another update I just get a continuous beep). Now I am connected to the aircraft but no signal / video feed.

Any suggestions?

Click to expand...

Are you getting telemetry ?

Can you arm the motors ?

What FW is both the craft and the controller on ?

 

W

Winston

Joined

May 2, 2016

Messages

27

Reaction score

1

Age

45

• Jul 10, 2016

• #4

Mad_angler1 said:

Are you getting telemetry ?

Can you arm the motors ?

What FW is both the craft and the controller on ?

Click to expand...

Thread title has it all.

 

W

Winston

Joined

May 2, 2016

Messages

27

Reaction score

1

Age

45

• Jul 10, 2016

• #5

Have flight controls. No video feed and now the camera has started doing a death spin.