Recent content by austinlarson

Hey Dustin The limit sensor is in the capsule that says watch your fingers. Getting in there won't do anything, and it is not designed to be opened after assembly. There is a bunch of grease and tiny gears that Are almost impossible to realign after opening. I opened mine up cause I was curious...

Yeah my servo end stop sensor went bad , it is becoming more and more common . I posted on this about a month ago here : Landing Gear Won't Pack Up The swap isn't too bad just go slow, there is an oring in the gps cover that is tricky to line up perfectly without a little bit of oring grease...

I use the 9-18mm all the time with the appropriate dji counter weight. I use 52mm B+W NDs which are a bit heavy but i velcro an additional weight to the back of the camera, (2 quarters gafftaped together) and a weight on the side of the tilt axis (2 quarters gaff taped together) and i get good...

Quick spin still makes my heart miss a beat every time

I had the App freeze up completely on me during flight yesterday. Happened twice. Ipad Mini 4, i always close all apps and reboot every couple flights. Never had an issue like this before, ever. Happened right after cutting the take while wrapping the file. Force quitting the app and...

I think if anything will be released it will be in some incremental upgrade airframe similar to the i1 V2.0.

Make sure you update drone, RC, and APP

Im not seeing a any difference when selecting between pro res d-log, and prores Rec709 when adjusting the setting in the Video menu. It all looks d-log to me. When i deactivate the SSD i can then turn the look to standard. Anyone else seeing this?

"R" in Lightroom "C" in Photoshop That'll fix those babies right up

I always charge rental (own op only) on my kit for jobs . Usually somewhere around $600-$800 US a day, depending on options like dual op, extra monitors, media, batteries, backup bird, etc... I'm not sure that having the X7 is going to be able to increase the rental rate proportionately to the...

Well here is a little update. The issue was in fact in the motor drive end stop sensor. I purchased the middle frame (part 19) and did the swap myself. I was going to send for repair but couldn't wait more than a few days and shipping to and from Hawaii is expensive. Got the part for $210...

Do you guys sell the part ? Inspire 2 Middle Frame (Part 20) If you are somewhat confident this assembly will fix the issue I'm probably just going to buy this part and do the swap myself .

Man if i could just get in there and change the sensor (Or plug back into its socket) i could be back in business in like an hour.

I haven't yet, what is interesting is that when twisting the manual drive with a screwdriver while flipping the switch on the RC the legs will then run through the entire motion. - So i know the motors are working! When the legs are fully raised or lowered there is a "buzzing" which sounds like...

Hey Guys, I2 - Got error message that landing gear won't pack up yesterday during flight and did a hand catch. (Stuck up) - Everything is on latest firmware, sounds like the servo is trying to push them down for a moment and then stops, so sounds like motor is still functioning. - Used a...