Recent content by Jeff48

Correction. It’s is a Panasonic Lumix 14-42 mm Not Olympus. Sorry for the error

*$5000 USD + actual shipping and full insurance costs *Located Pomona, Illinois USA *PayPal only. *Lower 48 states US shipping only. Pick up possible. *Great condition *No crashes *No Pro/Res or Cinema DNG licensing Very low flight hours between 12 and 20 *Used commercially as a backup...

Personally just not a Litchi fan. Bought it for my P3P a year and a half ago. Just wasn’t impressed enough to use it often. Never even tried to use it on my Mavic Pro. So, for at least the foreseeable future, I’m not going to waste space and money to install it on my 2 CSs and I’m not convinced...

We run the 5.5 CS on the Master and the 7.85 HB CS on the Slave. Camera operator gets the largest screen. As drone operator, I have zero complaints about the smaller screen. The price difference between a high quality tablet and a 5.5 CS is minimal for a dedicated device that will be supported...

I’ve updated both the 5.5 and 7.85 HB. No issues yet.

If You’re worried about upgrading the I2, just upgrade the CS firmware and Go4 app ( they upgrade at the same thing me on the CS). That is where the supposed overheating fix is.

We’re flying in Southern Illinois and having temps of 90-95 with humidity in the 70-75% range and in direct scorching sunlight. We haven’t had an overheating warning since the last upgrade. Prior to that we were seeing seeing what you described above. As a side note, prior to the update, we...

It returns the normal video from the X5S. You will have to repeat the process each time the FPV is toggled. It’s not a fix, just a workaround but it solves the problem during flight with no other negative consequences. DJI is aware of the issue and “working on it”.

Check out my post at #10 above. It works flawlessly

Disregard. The sunlight made both leds look identical. Once inside on the bench, the blue looks correct. Hahaha. Pick another color DJI. One that doesn’t colorshift in sunlight. You’re freaking out your customers.

current firmware and software all around Standard Controllers CS 5.5 on master CS 7.85 on Slave Normal operation until this morning. Started as usual. First AC then Master then Slave. Master shows solid green Slave show solid Purple then changes to solid Green when AC is connected but never...

Left side top of the CS. Middle is where the Internal CS resides. Right side would block the fan vent. So far, so good.

Are you connected to the I2? Option only appears if you’re connected to the I2. If you are other than a CrystalSky you may have to delete the app entirely first. Then, while on WiFi or LTE reinstall the app and re-sign in using your ID and password. Then open the app and go to the limitations...

From a FB contributor: “I can actually get the picture back by tapping the DJI logo to exit back to the main screen of the Go app, and then hit Go Fly again to come back in.” I tested this today and it works flawlessly in flight every time and the Home Point is not reset to the AC’s position at...