Welcome Inspire Pilots!
Join our free DJI Inspire community today!
Sign up

Recent content by robyr1

  1. R

    Inspire2 second FPV cam

    Dear all, I would like to add another fpv cam, so I bought the caddx walksnail nano. I can power it with a small 2S battery, but I would like to power it from the 6s, could somebody let me know where can I get this 25.2v?i opened the canopy already
  2. R

    Inspire 2 tB50 battery holder 3D file?

    No need exactly the same, I just need to use one single battery!
  3. R

    Inspire 2 tB50 battery holder 3D file?

    I would like to print a TB50 battery holder, could somebody share it the 3D file?
  4. R

    Turning on TB50 batteries?

    So you did not find any electronic components?? Just the positve and negative?
  5. R

    TB50 12 pins connector: model number?

    i don't have telemetry on the R2 but just the voltage..anyway, i think is not enough to connect a female socket with voltage.
  6. R

    TB50 12 pins connector: model number?

    So the only way to power it is to open it adding 2 wires bypassing the main circuit
  7. R

    TB50 12 pins connector: model number?

    I received the Inspire2 remote chargher cable, i tried to use it with inverting the direction, so: to the RC power port i connected 25V, but the battery it doesn't charge it...if i use with normal direction/condition, i get 25v from the RC power socket
  8. R

    TB50 12 pins connector: model number?

    Thanks but even the charger has the male pins,i need the female pins like the tb50 battery
  9. R

    Turning on TB50 batteries?

    Can you please try to reverse the direction of the voltage? I would like to connect 25V to the power connector of the inspire remote controller, and check is the voltage comes out from the 12 pin connector...or there is a diode?
  10. R

    TB50 12 pins connector: model number?

    Ahhaha sure, possible with humans and also for Ronin2!! With some wires!!
  11. R

    TB50 12 pins connector: model number?

    What I mean is to connect the male 12 pins to the male of the Ronin2, and the remote controller connector to a standard lipo, I need to power on the R2 through a simple lipo 6s
  12. R

    TB50 12 pins connector: model number?

    I know already this, but i would like to try to connect the cable to the R2 bridging cables, do you think i will boot on the R2?
  13. R

    TB50 12 pins connector: model number?

    Ok guys, i try to make me clear as better as i can! I would like to power the ronin2 with a lipo 6s, and i need to use the POWER INPUT lemo port and not the dual battery mount.I can try to connect the I2 remote controller charger cable to 1 port of the dual battery mount, maybe will work? But my...
  14. R

    TB50 12 pins connector: model number?

    not, because the TB50 has a female and its what i need it..and your product suggested has the male!
  15. R

    TB50 12 pins connector: model number?

    i live in Italy!