1345LS Plates installed

Alastair · Mar 8, 2017

Dave Stanton said:
I'm certainly not going to get involved in the feud between Alastair and EDDSkitz but here are my observations on the new prop locks. First, I goofed and didn't read the DJI notice about the 1345LS locks carefully enough, where it says they are for 1345T propellers. I own one of the early I1's with the push down/twist on locking propellers. So, of course, the 1345LS locks won't work until I buy new propellers. Go ahead EDDSkitz, let me have it. But, you know, I've never had a problem with my propellers. I check my props and the locks all the time before flights so I think I'll just keep doing that and save the $24 for new props. Besides, it took a long time to get the new prop locks from purchase to time-of-delivery (maybe because they are new).

What I find so amazing it makes me laugh is the so called "instruction book" that came with these. Take a look at the photo. My hand is not that big, yet the book fits in my palm. Page 1 and 2 are a disclaimers that basically say read all the instructions and DJI is not responsible for any problems that result from using these locks. Page 3 has the "instructions" which say, go to the website to find how how to use the 1345LS! All the rest of the book is multiple languages. Honestly, if I was a comedy writer for Saturday Night Live, I couldn't make up anything more absurdly funny!!!

Lol, your photo makes it look like a prop from that old tv show Land of the Giants.

Nigpd · Mar 12, 2017

80#
Just fitted my replacements. As expected, white props are perfect with no play. Red props had too much play.

Tried the foam inserts in the red props and found that there was still too much play. Took out the foam inserts and tried the vinyl tape and the result was perfect. No play whatsoever, matching the white props.

Fired up the inspire on idle just to check that all sounded OK, which it was. Just need some decent weekend weather now to give it a fly.

For those readers in the UK, the 10p piece is a perfect size to use as the template to cut out the vinyl tape shim

My thanks to Henry On the dji Mavic forum for the fix

Alastair · Mar 13, 2017

Nigpd said:
80#
Just fitted my replacements. As expected, white props are perfect with no play. Red props had too much play.

Tried the foam inserts in the red props and found that there was still too much play. Took out the foam inserts and tried the vinyl tape and the result was perfect. No play whatsoever, matching the white props.

Fired up the inspire on idle just to check that all sounded OK, which it was. Just need some decent weekend weather now to give it a fly.

For those readers in the UK, the 10p piece is a perfect size to use as the template to cut out the vinyl tape shim

My thanks to Henry On the dji Mavic forum for the fix

Any chance of posting a photo?

Nigpd · Mar 13, 2017

Alastair said:
Any chance of posting a photo?

I working away from home this week, but if you can wait, I'll get some pics up at the weekend

Alastair · Mar 13, 2017

That would be great! I just received mine and although not planning to install them right away, I like to see how you did it.

Al

BCF · Mar 14, 2017

Fitted mine some days ago but, for various reasons, I couldn't do a test flight until yesterday. From the outset all 4 props fitted snugly (no foam inserts needed) and no noticeable unwanted extra noise. The craft flew like a dream. Very happy.

Nigpd · Mar 19, 2017

A couple of pics as promised

First one shows the new plates installed on the white props, with no need for any mods. The second shows the red props with the need for vinyl tape to act as a shim to take up the slack

lake_flyer · Mar 19, 2017

Beautiful.
Still....nothing beats the original screw-on props with extra locking clamp.

Alastair · Mar 20, 2017

Nigpd said:
A couple of pics as promised

First one shows the new plates installed on the white props, with no need for any mods. The second shows the red props with the need for vinyl tape to act as a shim to take up the slack

View attachment 12807

View attachment 12808

Thanks for that.

Charles R. · Mar 23, 2017

ebanks89 said:

Very helpful. I just got mine and I was wondering what the inserts are for

Charles R. · Mar 26, 2017

I just installed mine. I also noticed that the red props have some slight play! So I inserted the foam into those the white props seem seems fine. Idled for around 5 minutes no noise

CSpenceFLY · Mar 26, 2017

I ended up getting some "liquid electrical tape" brush on vinyl and put a thin layer around the edges of the prop holes. Works like a charm.

Any idea if they plan to fix this properly

vlper · Mar 26, 2017

hi all. i received 6 screws with each motor mount pack, 6 for CCW, 6 for CW. but installation seem to use only 4. Is that right? Leftover screws always give me a heart attack.

AeroMirage · Mar 27, 2017

One of my kits had 5. I guess they figure you will drop some to be forever lost in the carpet.

Charles R. · Apr 1, 2017

I used 4 screws that what i received to for the bottom plate and to for the other plate

ajobmusee · Nov 25, 2017

where can i get just the insert foams?

1345LS Plates installed

Similar threads

Privacy & Transparency

Privacy & Transparency