Thanks to Jim at Florida Drone Supply for sharing his modification of the Secraft tray to fit the Cendence controller. I pieced it together for about $6 in parts from Home Depot. Attached is my parts list and photos.
Parts List
3 packs of M4-0.7 x 16MM cap screws. (2 screws in each pack) SKU 88740032383 $.56
3 packs of 1/4x3/8Od x .171id nylon spacers (2 per pack) SKU 889480149388 $.76
6 #8 lock washers
My final modification will be to mount a 150mm ARCA Swiss camera mount to the bottom to be able to use a tripod for static shoots. The 60mm adapter on the tray is for a field monitor when running in FPV mode and using a dedicated camera operator.
Parts List
3 packs of M4-0.7 x 16MM cap screws. (2 screws in each pack) SKU 88740032383 $.56
3 packs of 1/4x3/8Od x .171id nylon spacers (2 per pack) SKU 889480149388 $.76
6 #8 lock washers
My final modification will be to mount a 150mm ARCA Swiss camera mount to the bottom to be able to use a tripod for static shoots. The 60mm adapter on the tray is for a field monitor when running in FPV mode and using a dedicated camera operator.
