What is the 4 pin connector for? ESC signal, telemetry, ground?
Restoring a disassembled M100 that I didn't tear down. There was no cabling for this so I'm at a loss.
Getting a Go App ESC STATUS ERROR, solid Red status light, continuous ESC/motor beeping, DJI Assistant 2 doesn't read the ESC firmware version nor turn/test any motor.
Firmware(s) are up-to-date so I'm thinking either I missed something in the assembly or there's a Central Board Adapter Plate (part 25) issue. If so, let the teardown commence.
Thanks
Restoring a disassembled M100 that I didn't tear down. There was no cabling for this so I'm at a loss.
Getting a Go App ESC STATUS ERROR, solid Red status light, continuous ESC/motor beeping, DJI Assistant 2 doesn't read the ESC firmware version nor turn/test any motor.
Firmware(s) are up-to-date so I'm thinking either I missed something in the assembly or there's a Central Board Adapter Plate (part 25) issue. If so, let the teardown commence.
Thanks
