Time to sell one of my Inspire 1's. This was bought to fly commercially in France and comes with the required parachute system and DGAC paperwork (S1, S2 and S3). It has had such little use that it's time to move it on. It was modified soon after purchase with ceramic bearings from Boca Bearings and fitted with T-Motor carbon props (13x4.4) using precision milled, spin-on, aluminium prop adapters (the bird is just super-smooth & responsive with this set-up).
Included in the sale:-
1 x Inspire 1 V2.0 fitted with an after-market parachute system
1 x Zenmuse X3 camera
1 x Controller (GL658C)
1 x TB47 (22 cycles)
1 x TB48 (22 cycles)
Set of T-Motor carbon props (13 x 4.4)
DGAC documentation for S1, S2, S3 (required to fly commercially in France)
2 x SRP filters (ND8/CP & ND16/CP)
Original DJI props (1345) + adapters
1 x DJI charger (supplied with 2-pin continental EU cable)
2 x SkyRC 2-3S chargers (for the parachute system lipos)
DJI hard case
DJI harness
DJI lanyard
(If you want to remove the parachute system it's easy - 5 min job.... the original DJI backplate & screw set is included)
Please note:- the plastic motor covers showed hairline crazing when the screws were replaced following the bearing upgrade. Although purely cosmetic the 4 housings have been re-enforced with some electrical tape (see photos) to provide some greater rigidity. The rest of the airframe, props etc are in excellent condition..... as you'd expect from such little use.
Asking £900 ono - includes shipping (UK/ EU only)
(I can only attach 10 photographs so it's difficult to show all items in detail! Just ask if you want more!)
Included in the sale:-
1 x Inspire 1 V2.0 fitted with an after-market parachute system
1 x Zenmuse X3 camera
1 x Controller (GL658C)
1 x TB47 (22 cycles)
1 x TB48 (22 cycles)
Set of T-Motor carbon props (13 x 4.4)
DGAC documentation for S1, S2, S3 (required to fly commercially in France)
2 x SRP filters (ND8/CP & ND16/CP)
Original DJI props (1345) + adapters
1 x DJI charger (supplied with 2-pin continental EU cable)
2 x SkyRC 2-3S chargers (for the parachute system lipos)
DJI hard case
DJI harness
DJI lanyard
(If you want to remove the parachute system it's easy - 5 min job.... the original DJI backplate & screw set is included)
Please note:- the plastic motor covers showed hairline crazing when the screws were replaced following the bearing upgrade. Although purely cosmetic the 4 housings have been re-enforced with some electrical tape (see photos) to provide some greater rigidity. The rest of the airframe, props etc are in excellent condition..... as you'd expect from such little use.
Asking £900 ono - includes shipping (UK/ EU only)
(I can only attach 10 photographs so it's difficult to show all items in detail! Just ask if you want more!)
