Gimbal Horizon Drifting with Yaw movements

[GizaDog]

Is anyone experiencing this issue to where when you make a left or right turn the horizon does not stay level but returns to level when its not moving. Any tips to get this working correctly?

 

[cinejeff]

My first thought is to do an IMU calibration... and do it properly, on a truly flat and level surface and out of the wind completely. Once the IMU is calibrated, proceed to a compass calibration.

Even though this appears to be an error in the gimbal, the gimbal is dependent on the aircraft operating properly.

 

[GizaDog]

My first thought is to do an IMU calibration... and do it properly, on a truly flat and level surface and out of the wind completely. Once the IMU is calibrated, proceed to a compass calibration.

Even though this appears to be an error in the gimbal, the gimbal is dependent on the aircraft operating properly.

Thanks and Ive done that a few times to no avail. If I keep turning it in one direction it levels out.

 

[gray52]

Mine does this also, must be a firmware bug, hopefully Dji will sort it.

 

[lake_flyer]

i thought it was gone, but today the horizon tilted up on the left again.....sigh.