That's not normal nor common issue. If your standard RC is bounding but Cendence can't, then Cendence must be returned as faulty ...Try as I might I cannot get my Cendence remote to link to my Inspire 2. Both the remote and aircraft have updated firmware. Ive tried this with the Crystal Sky monitor as well as my phone and I just never get a green light. Please someone smarter than me must know a solution. Ive read a few threads on this on this forum, just no success.
Trying to bind the Cendence remote to my I2, gotta get off to work but I'll follow up on this later. Thank you.Tell us what procedure you are using to attempt to bind.
Yes I will check. It’s what they sent me with the bundle. Do you know what the correct model # is for the I2?Is this the first time your having this issue? Meaning first flight ? Cuz if it is the first time. You may have the wrong cendence remote. I once attempted to use my cendence remote from my Matrice 210 on my inspire 2. They look exactly the same. Check model number.
There's a different model of Cendence RC, developed not long ago for M200 V2 series. First incarnation of Cendence, however, should work with Inspire 2 and M200 series drones.Part Number:CP.EN.00000193.01
I haven’t bought one for my inspire 2 yet but this is the one I would look for. I had this issue last year. They may have done updates since then but I have not tried to link them again. If you look up cendence remote for inspire 2 and Matrice? There is 2 different part numbers last time I checked.
Inside the battery compartment of my Cendence remote itsays Type GL900A. On this page Cendence Remote under specifications it shows GL 900A as the remote for the Matrix. So I believe I have the wrong remote, I think this is the new model. And then there is this!!!Part Number:CP.EN.00000193.01
I haven’t bought one for my inspire 2 yet but this is the one I would look for. I had this issue last year. They may have done updates since then but I have not tried to link them again . If you look up cendence remote for inspire 2 and Matrice? There is 2 different part numbers last time I checked.
I have the Matrice 210 bought it last year. The cendence Rc will not link up to my inspire 2 found out the hard way by going back and forth with dji. They finally figured it out. Have not bought the cendence fro my inspire 2 but I will soon.There's a different model of Cendence RC, developed not long ago for M200 V2 series. First incarnation of Cendence, however, should work with Inspire 2 and M200 series drones.
Boom, problem solved! Newer Cendence works with Occusync transmission protocol, not Lightbridge ...Inside the battery compartment of my Cendence remote itsays Type GL900A. On this page Cendence Remote under specifications it shows GL 900A as the remote for the Matrix. So I believe I have the wrong remote, I think this is the new model. And then there is this!!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?